Well yeah .... I've an update on this: I did nothing but change the usb port from closest to RJ45 to the one nets to the closest to RJ45. This time it boots.
I'll investigate further on this ... This is on a brand new dockstar (I've now 2 of these things) but the seem to have small hardware differences ... read on Also Another thing I noticed: the led stopped working and things do not look rigth in /sys root@slackware:~# ls /sys/class/leds/ plug:green:health@ root@slackware:~# Where's the orange led gone ? and why os the green one not light up? root@slackware:~# cat /sys/class/leds/plug\:green\:health/trigger none nand-disk timer [default-on] mmc0 root@slackware:~# Regards David --- Mar 19/4/11, Thorsten Mühlfelder <[email protected]> ha scritto: > Da: Thorsten Mühlfelder <[email protected]> > Oggetto: Re: [ARMedslack] jeff Doozan's uboot > A: "Slackware ARM port" <[email protected]> > Data: Martedì 19 Aprile 2011, 12:48 > Am Tuesday 19 April 2011 12:42:02 > schrieb Davide: > > Is there something I need to do in order to boot from > a usb HDU that > > differs from booting from a usb flash drive ? > > My Dockstar boots fine with Doozan's u-boot and the > original Seagate Freeagent > Go HD. > > -- > Thorsten Mühlfelder > Salix OS: www.salixos.org > _______________________________________________ > ARMedslack mailing list > [email protected] > http://lists.armedslack.org/mailman/listinfo/armedslack > _______________________________________________ ARMedslack mailing list [email protected] http://lists.armedslack.org/mailman/listinfo/armedslack
