Although CONFIG_KEXEC is set on the ubuntu 2.6.38 kernel I was unable to boot any other kernel.
I then tryed to manipulate the initrd so that I could boot armedslack and that worked. If anyone is intrested I've a image ready to be nvflashed to partition 5 that boots armedslack from /dev/mmcblk0p7 (the onboard big partition). Regards David --- Dom 4/9/11, Davide <[email protected]> ha scritto: Da: Davide <[email protected]> Oggetto: [ARMedslack] Armedslack on the AC100 A: "Slackware ARM port" <[email protected]> Data: Domenica 4 settembre 2011, 10:48 I got round to doing some testing with an ubuntu kernel (2.6.38.1). With this kernel I was able to get the basics working chrooted. There are still some issues with kernel even with all the AC100 specific pathes applied: no sound, keyboard/touchpad often reset and sometimes crash in a way that will require a reboot to get things working again. Regards David -----Segue allegato----- _______________________________________________ ARMedslack mailing list [email protected] http://lists.armedslack.org/mailman/listinfo/armedslack
_______________________________________________ ARMedslack mailing list [email protected] http://lists.armedslack.org/mailman/listinfo/armedslack
