Hm ok, forgot what i say about the ro, i get the error, and if i set ro on the uboot bootargs, the kernel boots and stops at:
> dfc0: 00000000 00000000 00000000 c003274c 00000000 00000000 df05b800 > 00000000 > dfe0: de4cdfe0 de4cdfe0 df259d38 c00326c8 c00095a4 c00095a4 00000000 > 00000000 > [<c02e8f48>] (mmc_io_rw_direct+0x20/0x2c) from [<c02e9e88>] > (sdio_readb+0x3c/0x5c) > [<c02e9e88>] (sdio_readb+0x3c/0x5c) from [<bf12013c>] > (sbi_interrupt+0xa4/0x1e4 [uap8xxx]) > [<bf12013c>] (sbi_interrupt+0xa4/0x1e4 [uap8xxx]) from [<c02ea738>] > (sdio_irq_thread+0x74/0x234) > [<c02ea738>] (sdio_irq_thread+0x74/0x234) from [<c003274c>] > (kthread+0x84/0x90) > [<c003274c>] (kthread+0x84/0x90) from [<c00095a4>] > (kernel_thread_exit+0x0/0x8) > Code: 1a000000 e7f001f2 e58d4008 e58dc00c (e5900000) > ---[ end trace b7bb87bd4d1b074c ]--- > mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, > flow control disabled > i have to hit STRG+C and then the boot continues. On Sun, Apr 8, 2012 at 2:11 PM, Florian Koch < [email protected]> wrote: > Hi, > > yes i have set the wrong uboot var, but when i append ro to the right var, > the system won't boot, the services cannot start because of ro system. > > but forgot about this error, i have build a new minirootfs with the > buildscript, and installed the new rootfs to the dreamplug. > > I can boot into the system, no ro error , and i have not set the uboot > vars to ro. > > but i get a kernel oops during boot, and the boot hangs for some time. > (see attached oops.txt) > i think this come from missing modules. > > > > On Sun, Apr 8, 2012 at 10:53 AM, Davide <[email protected]> wrote: > >> >> I'd bet on "ro" missing on cmdline. >> >> >> >> ------------------------------ >> Il dom 8 apr 2012 10:21 CEST, Stuart Winter ha scritto: >> >> > >> >> >> >> What does this output? >> >> >> >> >> >> cat /proc/cmdline >> >> >> > >> >If this is the case, go into u-boot and do: >> >printenv >> > >> >and match the values found in /proc/cmdline and you should be able to >> >identify which u-boot variable needs altering. >> > >> >-- >> >Stuart Winter >> >Slackware ARM: www.armedslack.org >> >_______________________________________________ >> >ARMedslack mailing list >> >[email protected] >> >http://lists.armedslack.org/mailman/listinfo/armedslack >> >> _______________________________________________ >> ARMedslack mailing list >> [email protected] >> http://lists.armedslack.org/mailman/listinfo/armedslack >> > >
_______________________________________________ ARMedslack mailing list [email protected] http://lists.armedslack.org/mailman/listinfo/armedslack
