Hello, and a good day to you all. I am new to this list & ARMedSlack (not
new to Slackware though). I recently received a Raspberry PI, and did a
-current install per the instructions listed here:
http://www.daves-collective.co.uk/raspi/installing.shtml
All went well, but when I issued the "reboot" command it did not reboot
properly. When the PI comes up now it has a solid green (OK) light, and a
red light doing a quick 6 x flash.
I did a little googling, and found an article on the PI site with my
issue:
http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=10913
In a nut shell the article explains the problem is due to corrupt
start.elf file. They recommended You should be able to download start.elf
from here:
https://github.com/raspberrypi/firmware ... aster/boot
and copy it on the SD card.
Does this sound about right for ARMedSlack?
Any thoughts or hints about this would be greatly appreciated.
Thanks!
Mr. B-o-B
_______________________________________________
ARMedslack mailing list
[email protected]
http://lists.armedslack.org/mailman/listinfo/armedslack
