Hi, I am trying to load slack-13.37-miniroot_01May11.tar in Beagle Board -xm - Rev C.
So far, I made the following changes, 1. Created soft link, uImage, which points to uImage-kirkwood-2.6.38.4, in /etc/boot dir. 2. Edited the console port number to ttyS2 from ttyS0 in /etc/fstab file I *NOT* changed anything in "/boot" partition, which has MLO,uboot-bin,uEnv.txt file.[ came alone with the board ] Getting the following, ########################################################################## Texas Instruments X-Loader 1.5.0 (Mar 27 2011 - 17:37:56) Beagle xM Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42) OMAP36XX/37XX-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #577200229ff80000016849a901022026 Hit any key to stop autoboot: 0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt 134 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... Loading file "/boot/uImage" from mmc device 0:2 (xxa2) 2033192 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-2.6.38.4-kirkwood Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2033128 Bytes = 1.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... ################################################################# After the Loading Kernel Image , message nothing is happening. Can anyone Help? Thanks, Chekkiizhar
_______________________________________________ ARMedslack mailing list [email protected] http://lists.armedslack.org/mailman/listinfo/armedslack
