I had the same problem and the wise listers were kind enough to help me out.
Simplest solution would be to make sure that the last column in the csv file has data for all the rows. You can re-arrange the columns in the csv file to achieve this.
Jason
On 8/16/06, Baytops, Abdullah P. <[EMAIL PROTECTED]> wrote:
**Thanks I'll give that a try.-----Original Message-----**
From: Action Request System discussion list(ARSList) [mailto: [email protected]]
Sent: Wednesday, August 16, 2006 6:05 PM
To: [email protected]
Subject: Re: Remedy ImportI've seen that. For me it's always been because a comma was in the data or I had some hard returns where they should not be. Sometimes opening the csv in a hex editor will give a clue.Never have I had it work one time and not the other.- ScottHello Everyone,
I have a little problem that is spurattic when using Remedy Import.
I am in the process of importing some data from a CSV file that has about
3000 rows and 40 columns. During the import I get the following error:
Example
Line (202) 37 fields expected only 35 fields found
When I do the same import again a few moments later with no changes and have
no problem. But every 50 or 100 records it repeats itself so I do it again
a few moments later again and it works. Has anyway else had the problem
before.
Thanks in Advance
Abdul
_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at http://www.wwrug.org
__20060125_______________________This posting was submitted with HTML in it_____20060125_______________________This posting was submitted with HTML in it___
__20060125_______________________This posting was submitted with HTML in it___
