Hi Randeep. Thank you for your information.
Yes, this same code is working on our production (version 7.5) Yes, I certainly use `! in the filter name. I remember this problem was in one of the previous versions (just don’t remember which one) and BMC provided the hot fix. I wander is other people experienced the similar problem on 9 and there is an available patch. Thank you, Mike From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Randeep Atwal Sent: Wednesday, December 30, 2015 4:33 PM To: [email protected] Subject: Re: 9.0 Filter table walk issue ** Hi Mike Can you confirm if the same code worked on a pre 9.0 system? If so, I'd recommend you file this with BMC Support. But before reporting it, please ensure you are using `! on the filter doing the push into a seperate form if you are not already doing so. https://docs.bmc.com/docs/display/public/ars201401/Server-side+table+field+implementation+issues · When creating workflow for server-side tables, filters with the Call Guide action can be defined to loop over table columns. The values retrieved during the looping always comes from the last row of the table. To retrieve different values, postfix two special characters ( `!) on the filters within the filter guide. Adding these special characters causes your filter to execute synchronously, instead of deferring into a later filter processing pass. For example, if your filter within the Filter guide is named FormA: Push New Entry to Form B, postfix those special characters to look like this: FormA: Push New Entry to Form B`! hope this helps Randeep On Wed, Dec 30, 2015 at 12:54 PM, Mike Ilmer <[email protected]<mailto:[email protected]>> wrote: ** Hi list. I found that on 9.0 the filter table walk has issue. Filters recognize value in the table’s columns that could be used for the “if” validation. Values also could be used for the “SET” action. However direct pushing column’s values into the different forms doesn’t work. It pushing $NULL$ To iterate: I can use the filter to set values of columns into the separate fields. This works fine, but the direct push into the separate form is pushing $NULL$. Is this a known 9.0 bug? Is there are a patch that fixes it? Regards, Mike _ARSlist: "Where the Answers Are" and have been for 20 years_ _ARSlist: "Where the Answers Are" and have been for 20 years_ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years"
