That did the trick! Thanks! ________________________________
From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Grooms, Frederick W Sent: Friday, December 22, 2006 7:13 PM To: [email protected] Subject: Re: Table Walks ** Every time you call Guide 1 it will start from scratch Try using an End Guide to exit Guide 2 early and return to Guide 1 Fred ________________________________ From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Kemes, Lisa Sent: Friday, December 22, 2006 4:02 PM To: [email protected] Subject: Table Walks ** Here's what I have on my form Table one Row 1 Row 2 Table 2 Row 1 Row 2 I call Active Link Guide 1 through an Active Link (with the action being "Call Guide" - the table loop is set to Table One) Active Link Guide 1 refreshes Table 2 then calls Active Link Guide 2 and the table loop is set to Table 2 Active Link Guide 2 sets some fields from Row 1 and then loops to Row 2 If a field is set to "DONE" (which I did in an active link in Guide 2) then I call Guide 1 again (hoping that Guide 1 will loop to the next Row) When I look at my logs, it just keeps looping back to Table one Row 1 over and over again. How can I get it to go to the next row? If I've already extracted what I need from Table 2 Row 1, I don't want to have to loop through this whole table anymore. I hope this makes sense....... Lisa Kemes BMC Remedy Developer tyco / Electronics phone: 717-810-2408 fax: 717-810-2124 email: [EMAIL PROTECTED] __20060125_______________________This posting was submitted with HTML in it___ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
