**
Hi, John:
"Now there is the issue of trying to activate/deactivate the interval
so it only runs when needed."
It will stop when the qualification is no longer met. ($FIELDLABEL$ =
"myfieldlabel")
There is no need for an Active Link guide. I tested it without one. It
starts and stops as desired.
Michelle
------------------------------------------------------------------------
*From:* Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] *On Behalf Of *Reiser, John J
*Sent:* Tuesday, January 30, 2007 1:31 PM
*To:* [email protected]
*Subject:* Re: Workflow
**
Rick,
Is it that much of a performance hit if the SET fields is done on the
CURRENT SCREEN of the AL?
I mean, there should be no DB request for this action and anything
that would process a count would use some CPU time. Correct?
John J. Reiser
Software Development Analyst
Remedy Administrator/Developer
Lockheed Martin - MS2
The star that burns twice as bright burns half as long.
Pay close attention and be illuminated by its brilliance. -
paraphrased by me
------------------------------------------------------------------------
*From:* Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] *On Behalf Of *Rick Cook
*Sent:* Tuesday, January 30, 2007 11:52 AM
*To:* [email protected]
*Subject:* Re: Workflow
**
Again, there is a performance price for the Interval, especially if
multiple users will be doing it at the same time. If it's a price that
you can pay, then go for it.
*Rick*
------------------------------------------------------------------------
*From:* Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] *On Behalf Of *Reiser, John J
*Sent:* Tuesday, January 30, 2007 8:29 AM
*To:* [email protected]
*Subject:* Re: Workflow
**
Darshana, Rick, Dan & Saravanan,
The enhancement request for the full client and the Midtier would be
great but there is an alternative with AL workflow and the interval.
Granted it has a minimum of 3 seconds but you could fire a set fields
on interval that counts the length of the current field and subtracts
it from the known max length of the field.
Now there is the issue of trying to activate/deactivate the interval
so it only runs when needed. Maybe inside an AL Guide?
John J. Reiser
Software Development Analyst
Remedy Administrator/Developer
Lockheed Martin - MS2
The star that burns twice as bright burns half as long.
Pay close attention and be illuminated by its brilliance. -
paraphrased by me
------------------------------------------------------------------------
*From:* Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] *On Behalf Of *Daniel Bloom
*Sent:* Tuesday, January 30, 2007 10:04 AM
*To:* [email protected]
*Subject:* Re: Workflow
**
I would suggest submitting it as an enhancement request.
Rick Cook replied back in November with
“**
You could possibly do it in a View field, using either some OLE or
Java function. That would be my best guess. I can't think of any
native ARS way to do it.
**Rick**
I concur or
It sounds like something BMC Remedy could add to the Web Client.
Of course all such things will add weight to the web client and slow
things down.
(I am sure the clever webbish folks can come up with a work around,
based on what Rick has suggested)
but I suspect the extra processing may make it not worth the gain for
the users).
… Daniel
------------------------------------------------------------------------
*From:* Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] *On Behalf Of *Saravanan Palaniappan
*Sent:* January 30, 2007 4:52 AM
*To:* [email protected]
*Subject:* Re: Workflow
Did any one found solution for the question below
With Regards
PL.Saravanan
BTGS EXPEDIO FM | Team Virtusa (Chennai ATC) | Ph: +44-42002700 Extn:
3279 | Mobile : 99404-08691 .Email: [EMAIL PROTECTED]
------------------------------------------------------------------------
*From:* Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] *On Behalf Of *Darshana Jivan [MTN
Network Solutions]
*Sent:* 27 November 2006 15:29
*To:* [email protected]
*Subject:* Workflow
Hi,
Is it possible to populate a field as you typing in another
field….like real time information and not populating it after losing
focus or something…
What I am trying to do is while you tying into a text field it should
display how many characters are left for you to type in another text
field like the example below.
Any Ideas?
E.G
Characters Left:
*Regards,***
*Darshana Jivan*
*MTN Network Solutions*
Cell: 0832000451
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
MTN Corporate
39 Rivonia Road
No1 Commerce Square 3^rd Floor
Sandhurst
Johannesburg
2196
P.O. Box 3070; Randburg; 2125; South Africa.
| Disclaimer |
This email and the documents transmitted with it are confidential and
are intended for the addressee only, and must be treated as such. The
views expressed herein are those of the author and do not necessarily
represent those of MTN Network Solutions (MTN NS). MTN NS accepts no
liability in respect of any illegal content. No employee or agent of
MTN NS is authorised to conclude a binding agreement on behalf of MTN
NS by email (or otherwise) unless specifically stating otherwise in
such correspondence. Binding agreements with MTN NS may only be
concluded if printed in hard copy and signed by an authorised
representative of MTN NS.
__20060125_______________________This posting was submitted with HTML
in it___
---------------------------------------------------------------------------------------------
This message, including any attachments, contains confidential
information intended for a specific individual and purpose, and is
intended for the addressee only. Any unauthorized disclosure, use,
dissemination, copying, or distribution of this message or any of its
attachments or the information contained in this e-mail, or the taking
of any action based on it, is strictly prohibited. If you are not the
intended recipient, please notify the sender immediately by return
e-mail and delete this message.
__20060125_______________________This posting was submitted with HTML
in it___ __20060125_______________________This posting was submitted
with HTML in it___ __20060125_______________________This posting was
submitted with HTML in it___ __20060125_______________________This
posting was submitted with HTML in it___
__20060125_______________________This posting was submitted with HTML
in it___ __20060125_______________________This posting was submitted
with HTML in it___
