Patrick,
I just created a Windows PPM package you can use; you can download it from
http://remedydeveloper.org/ARSperl_190_701.zip
There is a readme file inside with instructions on how to install.
--
Met vriendelijke groet / Kind regards
Michiel Beijen
______________________________________________________
MANSOLUTIONS
Energieweg 60-62
3771 NA Barneveld
The Netherlands
Tel. +31-(0)612968592
Mail [EMAIL PROTECTED]
Internet http://bsm.mansolutions.nl
On 6/19/07, Michiel Beijen <[EMAIL PROTECTED]> wrote:
It is much easier to compile ARSperl on Windows with Visual Studio 6,
the same software as is used for the ActiveState distribution. This
works a lot quicker.
I will look into creating a compiled version of ARSperl for Windows
just as the 1.84 release that was compiled against the 6.3 API's.
BTW: Probably the 6.3 / 1.84 release will work fine for you, also
against a 7.x server. only the newest api capabilities like
ARImpersonateUser are not available, but it would be sufficient for
creating/modifying/deleting entries.
Kind regards,
Michiel Beijen
Mansolutions
On 6/19/07, Thilo Stapff <[EMAIL PROTECTED]> wrote:
> It is definitely possible to compile ARSperl with Visual C++ Express
2005.
>
> The most common diffculties might be as follows:
>
> (1) You will need also the "Microsoft Platform SDK".
>
> (2) You have to take care that some environment variables are set
> correctly. Visual Studio and the Platform SDK both supply batch scripts
> to achieve this ("vcvars32.bat" for Visual C++,
> "...\Setup\SetEnvLaunch***Retail.Cmd" for the SDK)
>
> (3) After compiling, the so called "manifest" file has to be embedded
> into the newly created ARS.dll (don't ask me why), or else you might get
> an error message "MSVCR80.dll not found" when trying to run ARSperl.
> To do this, run:
>
> mt -manifest blib\arch\auto\ARS\ARS.dll.manifest
> -outputresource:blib\arch\auto\ARS\ARS.dll;2
>
> (The "mt" command is installed with Visual Studio)
>
> Regards,
> Thilo Stapff
>
>
> patrick zandi wrote:
> > ** I tryed using ms 2005 express, but it did not like it either.. so I
> > will try this one..
> >
> > On 6/18/07, *Grooms, Frederick W* <[EMAIL PROTECTED]
> > <mailto:[EMAIL PROTECTED]>> wrote:
> >
> > **
> > It looks like it is still looking for a C compiler. I happened
to
> > be using cygwin to access my unix servers so I already had
GCC. You
> > can pull down gcc for windows from SourceForge
> > http://sourceforge.net/projects/gcw/
> > <http://sourceforge.net/projects/gcw/>
> >
> > Fred
> >
> >
------------------------------------------------------------------------
> > *From:* Action Request System discussion list(ARSList) [mailto:
> > [email protected] <mailto:[email protected]>] *On Behalf Of
> > *patrick zandi
> > *Sent:* Monday, June 18, 2007 5:37 PM
> > *To:* [email protected] <mailto:[email protected]>
> > *Subject:* Re: ARSPERL:complile question - Windows
> >
> >
> > **
> > till getting error::
> > here is the error log..
> >
> > Microsoft Windows [Version 5.2.3790]
> > (C) Copyright 1985-2003 Microsoft Corp.
> >
> >
> >
> > C:\ARSperl-1.90>nmake
> >
> > Microsoft (R) Program Maintenance Utility Version 1.50
> > Copyright (c) Microsoft Corp 1988-94. All rights reserved.
> >
> > Skip blib\lib/ARSarerrno-h.pm <http://h.pm/> (unchanged)
> > Skip blib\lib/ARSnparm.pm (unchanged)
> > Skip blib\lib/artypes.ph (unchanged)
> > Skip blib\lib/_h2ph_pre.ph (unchanged)
> > Skip blib\lib/ARSar- h.pm <http://h.pm/> (unchanged)
> > Skip blib\lib/ARSnterrno- h.pm <http://h.pm/> (unchanged)
> > Skip blib\lib/ARSnt-h.pm <http://h.pm/> (unchanged)
> > Skip blib\lib/ARSOOsup.pm (unchanged)
> > Skip blib\lib/ARSOOmsgs.pm (unchanged)
> > Skip blib\lib/ARSOOform.pm (unchanged)
> > Skip blib\lib/ARS.pm (unchanged)
> > cl -c -I"c:\Program Files\AR System\Arserver\Api/include"
> > -nologo -GF
> > -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT
> > -DHAVE_DES_FCRYPT -DNO_H
> > ASH_SEED -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT
> > -DPERL_IMPLICIT_SYS -DUSE_P
> > ERLIO -DPERL_MSVCRT_READFIX -MD -Zi -DNDEBUG -O1
> > -DVERSION=\"1.90\" -DXS_VER
> > SION=\"1.90\" "-IC:\Perl\lib\CORE" -D_WIN32 -DARS32 -DARS452
> > -DPERL_PATCHLE
> > VEL_IS=8 -DPERL_SUBVERSION_IS=8 -DPERL_BASEREV_IS=50 ARS.c
> > /_'cl' is not recognized as an internal or external command,
> > operable program or batch file_/.
> > *NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return
> > code '0x1'
> > *Stop.
> >
> > C:\ARSperl-1.90>
> >
> > On 6/18/07, *Grooms, Frederick W* <[EMAIL PROTECTED]
> > <mailto:[EMAIL PROTECTED]>> wrote:
> >
> > **
> > If you don't have some sort of compiler on your windows box
> > (like visual C, ...) you will have to pull down a copy of
> > nmake. A quick google found this site which talks about nmake
> > http://johnbokma.com/perl/make-for-windows.html and perl.
> >
> > Fred
> > --
> > Patrick Zandi
> >
> > __20060125_______________________This posting was submitted with
> > HTML in it___
> > __20060125_______________________This posting was submitted with
> > HTML in it___
> >
> >
> >
> >
> > --
> > Patrick Zandi __20060125_______________________This posting was
> > submitted with HTML in it___
>
>
_______________________________________________________________________________
> UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where
the Answers Are"
>
_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers
Are"
