Your set field operation should be "'*Assigned Group' = " + """" + "SIA_Config" """"
Joe D'Souza -----Original Message----- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] Behalf Of Mayfield, Andy L. Sent: Thursday, October 04, 2007 6:55 PM To: [email protected] Subject: Re: EXTERNAL command problems If I am reading it correctly, you are suppose to enclose the value portion in "". My set field is setting : "'*Assigned Group' = ""SIA_Config""" which sets the value of '*Assigned Group' = "SIA_Config" to my temp field. It will not allow me to enclose the entire statement in "". I get an error when trying it. Of course what I am doing is not working, so I am obviously doing something wrong. Andy L. Mayfield Sr. System Operation Specialist Alabama Power Company Office: 205-226-1805 Cell: 205-288-9140 SoLinc: 10*19140 ________________________________ From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Shellman, David Sent: Thursday, October 04, 2007 5:16 PM To: [email protected] Subject: Re: EXTERNAL command problems Andy, A qualification that works in the Advanced Search bar doesn't work with External. If I remember correctly the whole statement must be enclosed in double quotes. I don't have my laptop connected up at the moment so I can't give you an example. Dave -------------------------- [EMAIL PROTECTED] (Wireless) No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.1/1050 - Release Date: 10/4/2007 5:03 PM _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
