Hi Melissa, I sort of do the same thing as Ben with one exception. I do a new view and pull all the fields into it. That way if something inadvertently crashes or messes up, I don't have to worry about it affecting the main form.
Take care, Mary Dollus generationE Technologies ________________________________ From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Ben Cantatore Sent: Friday, March 07, 2008 9:17 AM To: [email protected] Subject: Re: Find a field by ID ** Melissa, Just do the following: 1. Go into the form you want to find the field on 1. Select Form\current view\fields in view from the menu 1. Highlight all the fields on the left and then click add this will push them all to the right side 1. Click ok 1. You'll have a mess in the upper left hand corner of the screen, use the find field or ID drop downs at the top to find the field you need. 1. Click Field properties after you've selected the field you need and look up the name 1. DON'T Save the form, exit and close without saving 1. Go back into the form and follow steps 1 and 2 and then push over only the field name that you've identified from step 6 Hope that helps. Ben Cantatore Remedy Administrator Avon (914) 935-2946 SUBSCRIBE arslist Melissa <[EMAIL PROTECTED]> Sent by: "Action Request System discussion list(ARSList)" <[email protected]> 03/07/2008 10:04 AM Please respond to [email protected] To [email protected] cc Subject Find a field by ID ** This may be a silly question, but how can I find a field by the ID number if it's not in the view? Looking for a field on HPD:HelpDesk by the Field ID and it's not in the FindID drop down. Thanks! Melissa __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
