Ron, On my install I see that filter and it "looks" the same way as yours does. (no execute on, no visible Guide to call) However, after looking at the exported xml def file of the filter it is clearly trying to call a Filter Guide called "WIPTMS:TAS:BypassedEvaluateSuccessor" but it does not exist on my server.
The filter in question could be used in a guide... let me go check that.... The filter in question appears to not be used in any filter guide on the application either. So maybe the filter in question is just an artifact that should have been removed before the product was released? HTH -- Carey Matthew Black Remedy Skilled Professional (RSP) ARS = Action Request System(Remedy) Love, then teach Solution = People + Process + Tools Fast, Accurate, Cheap.... Pick two. On Wed, Mar 19, 2008 at 12:22 AM, Ron Gehring <[EMAIL PROTECTED]> wrote: > ** > > > > I am running into problems getting subsequent tasks to activate in ITSM > 7.0.1 if the first task in the sequence that is about to be initialized is > set to "Bypassed." I have found a filter that is supposed to be calling a > guide but does not have an Execute On action nor does it specify which guide > to execute in the Call Guide action. > > > > If a few of you could look at filter > TMS:TAS:BypassedEvaluateSuccessorCallguide and let me know if yours is not > as empty as mine, please let me know what the execute on action is and which > guide it is calling. > > > > Thanks so much! > > Ron Gehring > > __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" > html___ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
