Sounds logical to me. Thanks, Dwayne
---- Original message ---- >Date: Thu, 5 Mar 2009 10:46:24 -0800 >From: Joe DeSouza <[email protected]> >Subject: Re: Workflow stops after exiting guide SOLVED >To: [email protected] > > ** > Dwayne, > > When running as an Administrator you probably have > the same Admininstrator UserID and Password on that > 'otehr' server while non admin users do not. So the > system probably tries to process whatever it is by > connecting to that 'other' server when running as an > Administrator user, while it fails for other users. > > If that is the case, try changing the Administrator > password on that other server and it may fail for > the Admin user as well.. > > My two cents.. > > Cheers > > Joe > > ------------------------------------------------ > > From: Dwayne Martin <[email protected]> > To: [email protected] > Sent: Thursday, March 5, 2009 1:21:06 PM > Subject: Re: Workflow stops after exiting guide > SOLVED > Thanks, Joe and Shafqat ! > > Shafqat asked, "What happens if you disable the > Active link that you have added?" The answer is > that the workflow continues to completion as you > would expect. That got me started eliminating > pieces of the guide, till I discovered that I had my > Report Server set to a different server. That > didn't seem to matter when I was running as > Administrator, but when an ordinary user tried to > display a Crystal Report, the workflow simply > stopped after exiting the guide. The "Save" button > was still enabled but if you clicked it nothing > happened. > > Anybody want to address the issue of why workflow > would come to halt in some cases if Report Server is > mis-defined, and not other cases? > > Thanks again, > Dwayne > > *** > From: Joe DeSouza <[email protected]> > > Errors of any kind during the execution of one of > the active links before the stop processing signal? > > Joe > > *** > > From: Shafqat Ayaz <[email protected]> > > Dwayne > two things come to mind, firstly what happens if you > disable the Active link that you have added? > secondly there isn't a Goto lurking somewhere there > is there? > > thanks > > shafqat > --- On Wed, 3/4/09, Dwayne Martin <[email protected]> > wrote: > > > >> From: Dwayne Martin <[email protected]> > >> Subject: Workflow stops after exiting guide > >> To: [email protected] > >> Date: Wednesday, March 4, 2009, 9:33 PM > >> Dear List, > >> > >> I have a long string of Active Links with > “Public” > >> permissions. We’ve been running them for years > with no > >> problem. > >> > >> I’ve added a new link in the middle of the > sequence that > >> calls a guide that calls additional links (all > with > >> “Public” permissions). > >> > >> Now, if I log in with Administrator permissions > and run the > >> sequence, the system does what you would expect, > namely run > >> the link that calls the guide, exit the guide, > then get on > >> with the rest of the links. > >> > >> BUT if I run the process as a test person without > >> Administrator permissions, the system exits the > guide, then > >> stops. The AL logging is identical up to exiting > the guide, > >> but for Administrator it continues with the > series of > >> Active Links, while for the test user it shows > “Stop > >> active link processing - On Modify” even tho > there are > >> more links to run. > >> > >> It has to be a permissions issue, but all the > links have > >> “Public” permissions and my test user has > been running > >> them for years. > >> > >> Any ideas? > >> > >> (ARS 7.1 p3, RH Linux server, Oracle 10.2 db) > >> > >> Dwayne Martin > >> James Madison University > __Platinum Sponsor: RMI Solutions ARSlist: "Where > the Answers Are" html___
