We got bitten by that on my last engagement for a while :-) and it took us a while to find out why – after enabling the IIS cs-bytes and sc-bytes where we noticed the sc-bytes exceeded the defined default limit of 8192..
Tauf, It’s the max_packet_size you need to set on Tomcat in the worker.properties file. You will find enough info on how and where to set this if you google.. Joe From: LJ LongWing Sent: Tuesday, April 26, 2011 11:26 AM Newsgroups: public.remedy.arsystem.general To: [email protected] Subject: Re: 7.6.04 - mid tier load balancing settings ** I found that the unable to setup data connection errors (in the past) were related to the Tomcat MaxHeader size being too small….it defaults to something like 8K…with the SSO we are using our header size can get huge, so we have it set to something like 128. From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Chowdhury, Tauf Sent: Tuesday, April 26, 2011 9:14 AM To: [email protected] Subject: Re: 7.6.04 - mid tier load balancing settings ** Thanks LJ, have you noticed that your users are getting any RPC or errors that say “Unable to setup Data connection” errors? We are getting that and I’m not sure if this is due to the app load balancer or the front end web. Tauf Chowdhury | Forest Laboratories, Inc. Analyst, Service Management Mobile:646.483.2779 -------------------------------------------------------------------------------- From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of LJ LongWing Sent: Tuesday, April 26, 2011 10:54 AM To: [email protected] Subject: Re: 7.6.04 - mid tier load balancing settings Tauf, I truly wish I could give you some sage advice from a seasoned master, but I fear that you and I are groping around in the same darkness trying to put together a 1000 piece puzzle. I have the same docs that you have and am planning on assuming (yes, very dangerous, I know) that the ‘defaults’ are a good starting point, and make modifications as monitoring goes on as we reach production mid next month. Regarding the #’s you provided below….I think the settings you have below look reasonable. Obviously the default of unchecked lifespan and a lifespan of 0 won’t balance. Ironically we have also taken the Max Connections per server from the default of 80 to 200 as well because of problems we were experiencing with them being exhausted. I don’t see any reason I wouldn’t be able to use the ones you outlined below…ours is a 4 Mid-Tier/2 App server setup. From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Chowdhury, Tauf Sent: Tuesday, April 26, 2011 4:14 AM To: [email protected] Subject: 7.6.04 - mid tier loadbalancing settings ** All (LJ), For those of you have gone through the load balancing exercise, can someone give a breakdown of the fields in the Connections section of the new mid tier? Yes, I’ve looked through the guide but it doesn’t clearly state what the ramifications of setting a number too high or too low means for something like, “Lifespan connection” or “Connection timeout.” Do these need to be greater or lower than what is set on the hardware load balancer? Has anyone found some settings that work better for them than others based on # of users or type of requests? Interestingly, BMC could not give me ANY recommendations or best practice guidance… so me and the network guys set the configs to what we thought made sense with a lot of assumptions on the settings below. The load balancer (between mid tier and app servers) is set to distribute based on Least Connection, with no persistency set. In my environment here are the settings: Enable Lifespan – Checked Connection Lifespan (minutes) = 60 Connection pool settings: Max connections per server = 200 Connection Timeout (minutes) = 30 Idle Connections per server = 5 Tauf Chowdhury | Forest Laboratories, Inc. Analyst, Service Management Informatics-Infrastructure Office: 631.858.7765 Mobile:646.483.2779 -------------------------------------------------------------------------------- This e-mail and its attachments may contain Forest Laboratories, Inc. proprietary information that is privileged, confidential or subject to copyright belonging to Forest Laboratories, Inc. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, or the employee or agent responsible for delivering this e-mail to the intended recipient, you are hereby notified that any dissemination, distribution, copying or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. _attend WWRUG11 www.wwrug.com ARSlist: "Where the Answers Are"_ -------------------------------------------------------------------------------- This e-mail and its attachments may contain Forest Laboratories, Inc. proprietary information that is privileged, confidential or subject to copyright belonging to Forest Laboratories, Inc. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, or the employee or agent responsible for delivering this e-mail to the intended recipient, you are hereby notified that any dissemination, distribution, copying or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. _attend WWRUG11 www.wwrug.com ARSlist: "Where the Answers Are"_ _attend WWRUG11 www.wwrug.com ARSlist: "Where the Answers Are"_ _attend WWRUG11 www.wwrug.com ARSlist: "Where the Answers Are"_ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: "Where the Answers Are"

