It's a good point.Really solves the problem of configuring both servers from mid-tiers. But if midtier 2 starts having problems I don't know if the problem comes form midtier 2 or ARS 2.
Any other idea? Jose M. Huerta Project Manager** Movil: 661 665 088 Telf.: 971 75 03 24**** Fax: 971 75 07 94**** <http://www.sm2baleares.es/>**** SM2 Baleares S.A. C/Rita Levi **** Edificio SM2 Parc Bit**** 07121 Palma de Mallorca**** <http://es-es.facebook.com/pages/SM2-Baleares/158608627954> <http://twitter.com/#!/SM2Baleares> <http://www.linkedin.com/company/sm2-baleares> La información contenida en este mensaje de correo electrónico es confidencial. La misma, es enviada con la intención de que únicamente sea leída por la persona(s) a la(s) que va dirigida. El acceso a este mensaje por otras personas no está autorizado, por lo que en tal caso, le rogamos que nos lo comunique por la misma vía, se abstenga de realizar copias del mensaje o remitirlo o entregarlo a otra persona y proceda a borrarlo de inmediato.**** P Por favor, no imprima este mensaje ni sus documentos adjuntos si no es necesario. On Wed, May 23, 2012 at 5:37 PM, Lyle Taylor <tayl...@ldschurch.org> wrote: > ** > > With our set up, we can do that in a slightly round-about way. We’ve got > 2 mid-tier servers and 2 AR servers. They both behind a load balancer.*** > * > > ** ** > > midtier.foo.bar (lb)**** > > midtier1.foo.bar**** > > midtier2.foo.bar**** > > ** ** > > ars.foo.bar (lb)**** > > ars1.foo.bar (first server in group)**** > > ars2.foo.bar (second server in group)**** > > ** ** > > We have the load balancer for ars.foo.bar configured so that traffic from > midter1 prefers to go to ars1, and traffic from midtier2 prefers to go to > ars2. I can get to whichever backend server I want by hitting the > appropriate midtier server directly. When I don’t care which backend > server I get (most of the time), I go to the midtier.foo.bar alias and let > the load balancer decide. Note that the ars.foo.bar load balancer is > configured to fail over to the active server in the case that one of the > backend servers is down. So, it prefers a specific server based on the > mid-tier server it’s coming from when everything is operating normally, but > will failover as appropriate when necessary.**** > > ** ** > > Does that make sense? Probably not what you’re looking for, but it’s an > option.**** > > ** ** > > Lyle**** > > ** ** > > *From:* Action Request System discussion list(ARSList) [mailto: > arslist@ARSLIST.ORG] *On Behalf Of *Jose Huerta > *Sent:* Wednesday, May 23, 2012 2:22 AM > *To:* arslist@ARSLIST.ORG > *Subject:* Configuring Mid-tier for a server group**** > > ** ** > > ** Hi listers,**** > > ** ** > > I'm with ARS and midtier 7.5.**** > > ** ** > > I have two ARS servers named:**** > > ** ** > > a1.contoso.es**** > > a2.contoso.es**** > > ** ** > > balanced both under address ars.contoso.es**** > > ** ** > > I have mid-tier configured only with server ars.contoso.es.**** > > ** ** > > But sometimes I want to access to one specific server, for instance when > setting ARS Server settings. I currently do it using the user tool. But I > want to allow to select it through mid-tier.**** > > ** ** > > If I allow the three addresses as valid ARS servers at the mid-tier, I see > the entry points lists at Home Page triplicated. **** > > ** ** > > What I want is to always work with ars.contoso.es, but if user changes > the URL, specifying the name of a real server, then connect directly to > this server.**** > > ** ** > > Is this possible? How can you do it with versions 7.6.04 and beyond if no > user tool is provided?**** > > > **** > > Jose M. Huerta > Project Manager**** > > Movil: 661 665 088**** > > Telf.: 971 75 03 24**** > > Fax: 971 75 07 94**** > > <http://www.sm2baleares.es/>**** > > SM2 Baleares S.A. > C/Rita Levi **** > > Edificio SM2 Parc Bit**** > > 07121 Palma de Mallorca**** > > <http://es-es.facebook.com/pages/SM2-Baleares/158608627954> > <http://twitter.com/#!/SM2Baleares> > <http://www.linkedin.com/company/sm2-baleares>**** > > La información contenida en este mensaje de correo electrónico es > confidencial. La misma, es enviada con la intención de que únicamente sea > leída por la persona(s) a la(s) que va dirigida. El acceso a este mensaje > por otras personas no está autorizado, por lo que en tal caso, le rogamos > que nos lo comunique por la misma vía, se abstenga de realizar copias del > mensaje o remitirlo o entregarlo a otra persona y proceda a borrarlo de > inmediato.**** > > P Por favor, no imprima este mensaje ni sus documentos adjuntos si no es > necesario.**** > > ** ** > > _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ **** > > > > NOTICE: This email message is for the sole use of the intended > recipient(s) and may contain confidential and privileged information. Any > unauthorized review, use, disclosure or distribution is prohibited. If you > are not the intended recipient, please contact the sender by reply email > and destroy all copies of the original message.**** > > _attend WWRUG12 www.wwrug.com ARSlist: "Where the Answers Are"_ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug12 www.wwrug12.com ARSList: "Where the Answers Are"
<<image002.jpg>>
<<image001.jpg>>
<<image004.jpg>>
<<image003.jpg>>
