Oh Right.. It was burned in.. but I could not provide a doc.. Silly ..thanks
On Mon, Dec 10, 2012 at 5:00 PM, ravi rai <[email protected]> wrote: > ** > It comes during Installation > BMC recommend that a system have a minimum of 2.8 GHz clock speed for x86 > PC compatibility Processor > > > Thanks > Ravi Rai > > > ------------------------------ > Date: Mon, 10 Dec 2012 16:56:09 -0500 > From: [email protected] > Subject: Re: Hardware sizing CPU speed only > To: [email protected] > > ** I thought so.. I saw it once.. ...I just cannot find it.. > > > On Mon, Dec 10, 2012 at 4:52 PM, Carl Wilson <[email protected]>wrote: > > ** > > Hi,**** > > BMC recommend 2.8GHz or higher.**** > > ** ** > > Cheers**** > > Carl**** > > ** ** > > http://www.missingpiecessoftware.com/**** > > ** ** > > ** ** > > ** ** > > *From:* Action Request System discussion list(ARSList) [mailto: > [email protected]] *On Behalf Of *patrick zandi > *Sent:* 10 December 2012 21:18 > *To:* [email protected] > *Subject:* Hardware sizing CPU speed only**** > > ** ** > > ** I cannot find the CPU sizing.. I see 4 cpu's etc.. at the following > link below.. but at what speed... 300mhz? > > I know I saw it somewhere... but I lost it.. > > Anyone?**** > > ** ** > > https://docs.bmc.com/docs/display/itsm7604/Solution+sizing+baseline**** > > > > -- > Patrick Zandi > _ARSlist: "Where the Answers Are" and have been for 20 years_ **** > _ARSlist: "Where the Answers Are" and have been for 20 years_ > > > > > -- > Patrick Zandi > _ARSlist: "Where the Answers Are" and have been for 20 years_ > _ARSlist: "Where the Answers Are" and have been for 20 years_ > -- Patrick Zandi _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years"
