Thank you much, you were correct. Arsperl is working now. I'm testing.
On Thu, Nov 15, 2012 at 2:31 AM, <[email protected]> wrote: > ** > Hi Philip, > > I think this is your problem. > > > Note (probably harmless): No library found for -licuucbmc > > Note (probably harmless): No library found for -licui18nbmc > > Note (probably harmless): No library found for -licudatabmc > try to copy all the libicu* files from /tools/bmc/remedy/bin to > /tools/bmc/remedy/api/lib > > Since 7.5 BMC does not include all necessary shared libraries into the > api/lib folder. > > HTH > > KR Conny > ------------------------------ > *Von:* Philip Wilson [mailto:[email protected]] > *Gesendet:* Donnerstag, 15. November 2012 05:23 > *An:* [email protected] > *Betreff:* Re: [Arsperl-users] Arsperl-users Digest, Vol 61, Issue 4 > > OK, I am back at it again. I really need this to work. > > I've created my own 32bit perl installation with DBI and DBD. Then I'm > adding arsperl. > > I cannot get arsperl to compile. Here are as many details as I could > gather. > > Everything in my Solaris 2.10 environment is supposed to be 32 bit. > > $ perl -V ( Could you compare this output to yours ? ) > > > > Summary of my perl5 (revision 5 version 16 subversion 0) configuration: > > Platform: > > osname=solaris, osvers=2.10, archname=sun4-solaris > > uname='sunos prescs07 5.10 generic_147440-11 sun4u sparcsunw,sun-fire-v240 ' > > config_args='-Dcc=gcc -des -Dprefix=/tools/perl' > > hint=previous, useposix=true, d_sigaction=define > > useithreads=undef, usemultiplicity=undef > > useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef > > use64bitint=undef, use64bitall=undef, uselongdouble=undef > > usemymalloc=n, bincompat5005=undef > > Compiler: > > cc='gcc', ccflags ='-fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE > -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV', > > optimize='-O', > > cppflags='-fno-strict-aliasing -pipe -fno-strict-aliasing -pipe > -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV' > > ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', > gccosandvers='solaris2.10' > > intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 > > d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 > > ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', > lseeksize=8 > > alignbytes=8, prototype=define > > Linker and Libraries: > > ld='gcc', ldflags =' ' > > libpth=/usr/lib /usr/ccs/lib > > libs=-lsocket -lnsl -ldl -lm -lc > > perllibs=-lsocket -lnsl -ldl -lm -lc > > libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a > > gnulibc_version='' > > Dynamic Linking: > > dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' > > cccdlflags='-fPIC', lddlflags='-G' > > Characteristics of this binary (from libperl): > > Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV > > PERL_MALLOC_WRAP PERL_PRESERVE_IVUV > > PERL_USE_SAFE_PUTENV USE_LARGE_FILES USE_LOCALE > > USE_LOCALE_COLLATE USE_LOCALE_CTYPE > > USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF > > Built under solaris > > Compiled at Nov 14 2012 19:39:00 > > @INC: > > /production/77j/perl32/lib/site_perl/5.16.0/sun4-solaris > > /production/77j/perl32/lib/site_perl/5.16.0 > > /production/77j/perl32/lib/5.16.0/sun4-solaris > > /production/77j/perl32/lib/5.16.0 > > . > > ----------------------------------- > > $ env > > ARS=/tools/bmc/remedy > > PATH=/oracle/g01/software/client32/ > 9.2.0.8/bin:/production/77j/perl32/bin:/oracle/g01/software/client32/9.2.0.8/bin:/usr/bin::/usr/sbin:/opt/SUNWspro/bin:/usr/ccs/bin:/usr/sfw/bin::/usr/sbin > : > > SHELL=/usr/bin/ksh > > > LD_LIBRARY_PATH=/production/77j/perl32/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS:/usr/local/lib:/usr/sfw/lib:/oracle/g01/software/client32/ > 9.2.0.8/lib:/tools/bmc/remedy/api/lib > > ORACLE_HOME=/oracle/g01/software/client32/9.2.0.8 > > PWD=/production/77j/stage/ars/ARSperl-1.93 > > ----------------- > > Makefile.PL entries that are not commented: > > > > $ARSAPI = "/tools/bmc/remedy/api"; > > $ARSVERSION = 7.6; > > $ARCHITECTURE = ""; > > $ENCRYPT = 0; > > ------------------------------- > > Here is the compile and test: > > $ /production/77j/perl32/bin/perl Makefile.PL > > Building against perl 5.016000 > > Generating support.h file.. > > Processing AR_STRUCT_ITEM codes.. > > Processing AR_SERVER_STAT codes.. > > Processing AR_SCHEMA codes.. > > Processing AR_COM_PARM codes.. > > Processing AR_COM_METHOD codes.. > > Processing AR_DDE codes.. > > Processing AR_ACTIVE_LINK_ACTION codes.. > > Processing AR_ACTIVE_LINK_ACTION_OPEN codes.. > > Processing AR_CHAR_MENU_DD type codes.. > > Processing AR_CHAR_MENU_DD name codes.. > > Processing AR_CHAR_MENU_DD value format.. > > Processing AR_CHAR_MENU codes.. > > Processing AR_FILTER_ACTION codes.. > > Processing AR_MENU_REFRESH codes.. > > Processing AR_PERMISSIONS (Schema) codes.. > > Processing AR_PERMISSIONS (Field) codes.. > > Processing AR_DATA_TYPE codes.. > > Processing AR_BYTE_LIST codes.. > > Processing AR_NO_MATCH codes.. > > Processing AR_MULTI_MATCH codes.. > > Processing AR_RETURN codes.. > > Processing AR_FUNCTION codes.. > > Processing ARCON codes.. > > Processing ARCONOWNER codes.. > > Processing ARREF codes.. > > Processing AR_KEYWORD codes.. > > Processing AR_SERVER_INFO codes.. > > Processing AR_SIGNAL codes.. > > Generating serverTypeInfoHints.h .. > > Converting C header files to perl modules .. > > Configuring with options: > > ARSVERSION = 7.60 > > ARSAPI = /tools/bmc/remedy/api > > AUTODEFINES = -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 > -DPERL_PATCHLEVEL_IS=16 > -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 > > Note (probably harmless): No library found for -licuucbmc > > Note (probably harmless): No library found for -licui18nbmc > > Note (probably harmless): No library found for -licudatabmc > > Writing Makefile for ARS > > Writing MYMETA.yml and MYMETA.json > > === ARSperl 'make test' configuration. === > > Please enter the following information. This information will be > > recorded in ./t/config.cache > > If you want to skip the 'make test' step, just hit ENTER > > three times. You can configure it later by either re-running > > 'perl Makefile.PL' or by editting ./t/config.cache > > Fair warning: you probably don't want to run 'make test' against a > > production ARSystem server. > > Server Name []: > > Admin Username []: > > Admin Password []: > > TCP Port [0]: > > Type 'make' (windows: 'nmake') to build ARSperl. > > Type 'make test' to test ARSperl before installing. > > Type 'make install' to install ARSperl. > > $ make > > cp ARS/arerrno-h.pm blib/lib/ARS/arerrno-h.pm > > Skip blib/lib/ARS/OOsup.pm (unchanged) > > cp ARS/ar-h.pm blib/lib/ARS/ar-h.pm > > Skip blib/lib/ARS/nparm.pm (unchanged) > > Skip blib/lib/ARS/OOmsgs.pm (unchanged) > > Skip blib/lib/ARS/OOform.pm (unchanged) > > cp ARS.pm blib/lib/ARS.pm > > AutoSplitting blib/lib/ARS.pm (blib/lib/auto/ARS) > > /production/77j/perl32/bin/perl /production/77j/perl32/lib/5.16.0/ExtUtils > /xsubpp -typemap /production/77j/perl32/lib/5.16.0/ExtUtils/typemap - > typemap typemap ARS.xs > ARS.xsc && mv ARS.xsc ARS.c > > gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe > -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O > -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" > -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" > -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 > -DPERL_PATCHLEVEL_IS=16 > -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 ARS.c > > ARS.c: In function `XS_ARS_ars_GetListContainer': > > ARS.xs:1197: warning: 'ret' might be used uninitialized in this function > > gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe > -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O > -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" > -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" > -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 > -DPERL_PATCHLEVEL_IS=16 > -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 support.c > > gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe > -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O > -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" > -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" > -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 > -DPERL_PATCHLEVEL_IS=16 > -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 supportrev.c > > gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe > -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O > -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" > -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" > -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 > -DPERL_PATCHLEVEL_IS=16 > -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 supportrev_generated.c > > Running Mkbootstrap for ARS () > > chmod 644 ARS.bs > > rm -f blib/arch/auto/ARS/ARS.so > > LD_RUN_PATH="/usr/lib" gcc -G ARS.o support.o supportrev.o > supportrev_generated.o -o blib/arch/auto/ARS/ARS.so /tools/bmc/remedy/api > /lib/libar.a \ > > -L/tools/bmc/remedy/api/lib -lnsl -lpthread \ > > chmod 755 blib/arch/auto/ARS/ARS.so > > cp ARS.bs blib/arch/auto/ARS/ARS.bs > > chmod 644 blib/arch/auto/ARS/ARS.bs > > > > > > $ make test > > PERL_DL_NONLAZY=1 /production/77j/perl32/bin/perl "-MExtUtils::Command::MM" > "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t > > t/00connect.t ........... Can't load > '/production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so' for > module ARS: ld.so.1: perl: fatal: relocation error: file > /production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so: symbol > ucnv_setDefaultName_3_2: referenced symbol not found at > /production/77j/perl32/lib/5.16.0/sun4-solaris/DynaLoader.pm line 190. > > at t/00connect.t line 12. > > Compilation failed in require at t/00connect.t line 12. > > BEGIN failed--compilation aborted at t/00connect.t line 12. > > t/00connect.t ........... Dubious, test returned 255 (wstat 65280, 0xff00) > > No subtests run > > t/01import.t ............ Can't load > '/production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so' for > module ARS: ld.so.1: perl: fatal: relocation error: file > /production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so: symbol > ucnv_setDefaultName_3_2: referenced symbol not found at > /production/77j/perl32/lib/5.16.0/sun4-solaris/DynaLoader.pm line 190. > > at t/01import.t line 7. > > Compilation failed in require at t/01import.t line 7. > > BEGIN failed--compilation aborted at t/01import.t line 7. > > t/01import.t ............ Dubious, test returned 255 (wstat 65280, 0xff00) > > No subtests run > > t/02export.t ............ ^C$ > > ------------------------------------------------ > > Any ideas? > > > > > > ------------------------------------------------------------------------------ > Monitor your physical, virtual and cloud infrastructure from a single > web console. Get in-depth insight into apps, servers, databases, vmware, > SAP, cloud infrastructure, etc. Download 30-day Free Trial. > Pricing starts from $795 for 25 servers or applications! > http://p.sf.net/sfu/zoho_dev2dev_nov > > > -- > Arsperl-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/arsperl-users >
------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov
-- Arsperl-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/arsperl-users
