On Mon, Oct 17, 2016 at 5:39 PM, Aaron Vontell <aaronvont...@gmail.com> wrote: > I am new to working with FPGAs, so sorry if this is a very simple question. > I am working with a Pipistrello FPGA board, which is being controlled by > ARTIQ. Using ARTIQ, I have configured a device_db.pyon file for TTL outputs > (following the steps from > https://m-labs.hk/artiq/manual-release-2/core_device.html#pipistrello), and > have written a simple program that will pulse some of the TTL outputs. I am > attempting to measure the output using an oscilloscope, but I am having > trouble with figuring out where the actual output is on the board. After > searching online, I have not found any decent documentation regarding what > the different channels on the board represent, or which ports are used for > what. > > Any help with finding a resource that details the outputs of the board, or > simply a tip on where to look for these TTL pulses on the board would be > greatly appreciated!
The mapping is also on the nist-qc1/qcpapilio schematic that you have. -- Robert Jördens. _______________________________________________ ARTIQ mailing list https://ssl.serverraum.org/lists/listinfo/artiq