Hi Huang, with the controlfile you sent (after fixing the atmfields_checkedCalc as described in the mail before and replacing some input data that you use, but i don't have: f_grid and scat_data), i can NOT reproduce the assert error that you announced before. case runs through and produces reasonable results.
wishes, Jana On Mon, Jul 6, 2015 at 9:36 AM, 黄莹珠 <[email protected]> wrote: > Hi Jana, > My control file is attached.Pls check. > > The error message is as follows: > Run-time error in controlfile: chival_test.arts > Run-time error in method: ybatchCalc > Run-time error at ybatch_index 5: > Run-time error in agenda: ybatch_calc_agenda > Run-time error in method: atmfields_checkedCalc > There are bad partition functions in your setup. > Minimum temperature for defined partition functions is: 150 K. > Maximum temperature for defined partition functions is: 300 K > There is a t_field entry of 305.61 K. > > Run-time error at ybatch_index 4: > Run-time error in agenda: ybatch_calc_agenda > Run-time error in method: atmfields_checkedCalc > There are bad partition functions in your setup. > Minimum temperature for defined partition functions is: 150 K. > Maximum temperature for defined partition functions is: 300 K > There is a t_field entry of 300.34 K. > > Run-time error at ybatch_index 2: > Run-time error in agenda: ybatch_calc_agenda > Run-time error in method: atmfields_checkedCalc > There are bad partition functions in your setup. > Minimum temperature for defined partition functions is: 150 K. > Maximum temperature for defined partition functions is: 300 K > There is a t_field entry of 317.26 K. > > > Stopping ARTS execution. > Goodbye. > Regards > Huang Yingzhu > > > -----原始邮件----- > *发件人:* "Jana Mendrok" <[email protected]> > *发送时间:* 2015年7月6日 星期一 > *收件人:* "黄莹珠" <[email protected]> > *抄送:* "[email protected] List Users" <[email protected]> > *主题:* assert in FOS case > > > Hi Huang, > > do you only use input data from arts and/or arts-xml-data with the failing > case? if so, just send your controlfile. > wishes, > Jana > > On Mon, Jul 6, 2015 at 5:47 AM, 黄莹珠 <[email protected]> wrote: > >> Dear Jana, >> Thank you for your update for the liquid cloud absorption.The error >> occured in FOS example is happened when I use batch calculation,and I don't >> know which is the error profile. >> >> Regards >> >> Huang Yingzhu >> >> >> >> > -----原始邮件----- >> > 发件人: [email protected] >> > 发送时间: 2015年7月3日 星期五 >> > 收件人: [email protected] >> > 抄送: >> > 主题: arts-users Digest, Vol 75, Issue 2 >> > >> > Send arts-users mailing list submissions to >> > [email protected] >> > >> > To subscribe or unsubscribe via the World Wide Web, visit >> > https://www.sat.ltu.se/mailman/listinfo/arts-users >> > or, via email, send a message with subject or body 'help' to >> > [email protected] >> > >> > You can reach the person managing the list at >> > [email protected] >> > >> > When replying, please edit your Subject line so it is more specific >> > than "Re: Contents of arts-users digest..." >> > >> > >> > Today's Topics: >> > >> > 1. Re: arts-users Digest, Vol 74, Issue 19 (Jana Mendrok) >> > 2. Re: About ParticleType2abs_speciesAdd in batch calculation >> > (Jana Mendrok) >> > >> > >> > ---------------------------------------------------------------------- >> > >> > Message: 1 >> > Date: Thu, 2 Jul 2015 13:15:12 +0200 >> > From: Jana Mendrok <[email protected]> >> > Subject: Re: [arts-users] arts-users Digest, Vol 74, Issue 19 >> > To: ??? <[email protected]> >> > Cc: "[email protected] List Users" <[email protected]> >> > Message-ID: >> > <ca+dygd6m_im1_l38s3mokelpzua71h-ejnqs0rw+d4nebn_...@mail.gmail.com> >> > Content-Type: text/plain; charset="utf-8" >> > >> > Hi Huang, >> > >> >> > i eventually fixed a couple of things related to abs_species "liquidcloud", >> >> > "icecloud", "rain". apart from a bugfix with "rain", all updates have only >> > been done in the development version (arts-2.3), not in arts2.2. >> > (i.e., update both your arts versions) >> > >> >> > however, only liquidcloud is available with absorption lookup tables (the >> > other two parametrizations are not suitable for the approach used with >> > lookup tables, which assumes that abs_xsec are a function of p&T). the >> > other two can NOT be used with lookup tables, but only with on-the-fly >> >> > absorption (with on-the-fly absorption, all three can be used in arts-2.2, >> > too). >> > >> >> > neither of the three cloud abs continua allows negative "vmr" as input. if >> >> > your data contains such, you either have to clean them in a pre-processing >> >> > yourself, or with arts-2.3 there is now WSMs batch_atm_field_compactCleanup >> >> > and atm_field_compactCleanup to remove spurious values in the profile data >> > (check out their online documentation). >> > >> >> > and, i checked input unit requirements. liquid- and icecloud require kg/m3, >> > rain required mm/h in arts-2.2, but has changed to expect kg/m2/s in >> > arts-2.3. >> > >> > so far about that. >> > wishes, >> > Jana >> > >> > On Tue, Jun 30, 2015 at 11:27 AM, ??? <[email protected]> wrote: >> > >> > > Hi,Jana, >> > > this is my controflie as attached,and the running error is attached. >> > > >> > > Run-time error in controlfile: my_2-2-3_liquid.arts >> > > Run-time error in method: abs_lookupSetupBatch >> > > I don't know whether this tag uses h2o_abs or not. >> > > Cannot set abs_nls automatically. >> > > Stopping ARTS execution. >> > > Goodbye. >> > > >> > > Thanks >> > > >> > > Huang Yingzhu >> > > >> > >> > >> > -- >> > ===================================================================== >> > Jana Mendrok, Ph.D. (Research Associate) >> > Lule? University of Technology >> > Department of Computer Science, Electrical and Space Engineering >> > Division of Space Technology >> > PO Box 812 >> > 981 28 Kiruna, Sweden >> > >> > Phone : +46 (0)980 6 7540 >> > ===================================================================== >> > -------------- next part -------------- >> > An HTML attachment was scrubbed... >> > URL: >> http://www.sat.ltu.se/pipermail/arts-users/attachments/20150702/47f103d1/attachment.html >> >> > >> > ------------------------------ >> > >> > Message: 2 >> > Date: Thu, 2 Jul 2015 13:26:08 +0200 >> > From: Jana Mendrok <[email protected]> >> > Subject: Re: [arts-users] About ParticleType2abs_speciesAdd in batch >> > calculation >> > To: ??? <[email protected]> >> > Cc: "[email protected] List Users" <[email protected]> >> > Message-ID: >> > <ca+dygd7bk16c5cpyqmrewuopuc0x5rzgreuh-scdqi3+d7k...@mail.gmail.com> >> > Content-Type: text/plain; charset="utf-8" >> > >> > Hi Huang, >> > >> > ok, there's indeed something going wrong in a way that shouldn't happen. >> >> > as written before, we don't guarantee functionality of FOS. still, i'd make >> >> > an attempt at looking on what is going wrong here, but i'll need additional >> > information for that... >> > >> > what do you mean by "empty or other unexpected case of the liquid cloud >> > mass"? what did you set there? what data do you use? >> >> > it would be good if you can prepare a case that i can run and where i can >> >> > reproduce the error. make it an as easy case as possible, make it use only >> >> > data from arts itself or the arts-xml-data (if really other data is needed, >> >> > cut it as small as possible and send it to me.). send me the controlfile. >> > >> > then i'll see, what i can do. >> > no promises, though. >> > best wishes, >> > Jana >> > >> > >> > On Wed, Jul 1, 2015 at 2:33 AM, ??? <[email protected]> wrote: >> > >> > > Hi,Jana, >> > > Thanks again. >> > > And I am testing the FOS example and find that if there is a empty or >> > > other >> >> > > unexpected case of the liquid cloud mass,the errors occured as follows: >> > > >> > > WARNING: >> > > scat_data consistency check not implemented (yet?!) for >> > > ptype 30! >> > > Cloudbox is switched off! >> > > Cloudbox is off, pnd_field is set to empty. >> > > Cloudbox is switched off! >> > > Cloudbox is off, pnd_field is set to empty. >> > > Cloudbox is switched off! >> > > Cloudbox is off, pnd_field is set to empty. >> > > arts: /usr/local/arts-2.3/arts/src/array.h:199: base& >> >> > > Array<base>::operator[](Index) [with base = long int; Index = long int]: >> > > Assertion `n<nelem()' failed. >> > > >> > > Best regards >> > > >> > > Huang Yingzhu >> > > >> > > >> > >> > >> > >> > >> > -- >> > ===================================================================== >> > Jana Mendrok, Ph.D. (Research Associate) >> > Lule? University of Technology >> > Department of Computer Science, Electrical and Space Engineering >> > Division of Space Technology >> > PO Box 812 >> > 981 28 Kiruna, Sweden >> > >> > Phone : +46 (0)980 6 7540 >> > ===================================================================== >> > -------------- next part -------------- >> > An HTML attachment was scrubbed... >> > URL: >> http://www.sat.ltu.se/pipermail/arts-users/attachments/20150702/6f66eabf/attachment-0001.htm >> >> > >> > ------------------------------ >> > >> > _______________________________________________ >> > arts-users mailing list >> > [email protected] >> > https://www.sat.ltu.se/mailman/listinfo/arts-users >> > >> > >> > End of arts-users Digest, Vol 75, Issue 2 >> > ***************************************** >> >> >> >> >> _______________________________________________ >> arts-users mailing list >> [email protected] >> https://www.sat.ltu.se/mailman/listinfo/arts-users >> >> > > > -- > ===================================================================== > Jana Mendrok, Ph.D. (Research Associate) > Luleå University of Technology > Department of Computer Science, Electrical and Space Engineering > Division of Space Technology > PO Box 812 > 981 28 Kiruna, Sweden > > Phone : +46 (0)980 6 7540 > ===================================================================== > > > > > > -- ===================================================================== Jana Mendrok, Ph.D. (Research Associate) Luleå University of Technology Department of Computer Science, Electrical and Space Engineering Division of Space Technology PO Box 812 981 28 Kiruna, Sweden Phone : +46 (0)980 6 7540 =====================================================================
_______________________________________________ arts-users mailing list [email protected] https://www.sat.ltu.se/mailman/listinfo/arts-users
