Hi Mathias, A couple of ideas:
1. Since the frequency value in the error output has only 5 digits after the decimal[1], it might well be that your extension by 700 kHz is not sufficient and still leads to the same error message due to rounding. I'd propose to extend f_grid by 2 MHz and see if that fixes the problem. 2. You probably did this but to be sure I'll ask anyway: Did you recalculate the lookup table after extending the f_grid? Cheers, Oliver [1] we'll apply a fix to improve that output > On 30. Jun 2023, at 09:00, Mathias Milz <mathias.m...@ltu.se> wrote: > > Dear all, > Maybe someone here can help me: > > I set up a new retrieval for high resolving spectrometer using pyARTS with > OEM. Since it covers a wider range of the spectrum with higher resolution, > I've expanded the f_grid accordingly (with relatively high resolution, lower > than the spectrum). > pyARTS calculates the LookUp Table as it should. > If the run then goes into ws.OEM, then it stops with the error message > below. > I extended the spectrum by 700kHz and the error occurs again. > According to the error message, it happens in yCalc. > What makes me suspisious: The pure forward calculation withy Calc (i.e. > without OEM call) with the LUT read in runs perfectly. > Does anyone here have an idea what the problem could be? > Thanks in advance > Mathias > And here the error message: > Run-time error in method: yCalc > User Error: failed > Error is found at: > > /usr/local/miniconda/envs/pyarts-build/conda-bld/pyarts_1675241025317/work/src/m_rte.cc:2774 > Please follow these instructions to correct your error: > User Error: failed > Error is found at: > > /usr/local/miniconda/envs/pyarts-build/conda-bld/pyarts_1675241025317/work/src/rte.cc:1750 > Please follow these instructions to correct your error: > Run-time error in function: iyb_calc > Run-time error in agenda: iy_main_agenda > Run-time error in method: iyClearsky > User Error: do_abort > Error is found at: > > /usr/local/miniconda/envs/pyarts-build/conda-bld/pyarts_1675241025317/work/src/m_rte.cc:656 > Please follow these instructions to correct your error: > Error messages from failed cases: > Runtime-error in source calculation at index 122: > Run-time error in agenda: propmat_clearsky_agenda > Run-time error in method: propmat_clearskyAddFromLookup > Problem with gas absorption lookup table. > At least one frequency is outside the range covered by the lookup table. > Your new frequency value is 2.32501e+11 Hz. > The allowed range is 2.295e+11 to 2.32501e+11 Hz. Runtime-error in source > calculation at index 162: > Run-time error in agenda: propmat_clearsky_agenda > Run-time error in method: propmat_clearskyAddFromLookup > Problem with gas absorption lookup table.
smime.p7s
Description: S/MIME cryptographic signature
