How to Download and Install LinkRunner AT 2000 Software The LinkRunner AT 2000 is a network tester that can perform various tasks such as testing copper and fiber Ethernet connectivity, validating PoE power, verifying cable length and wire-map, and uploading test results to the Link-Live Cloud Service. To use the LinkRunner AT 2000, you need to download and install the LinkRunner AT Manager software on your computer. Here are the steps to do that:
1. Log in to your Link-Live account. If you don't have one, you can create one for free at https://link-live.com/. 2. From the Options menu, expand the Support option and select the Software Downloads option. 3. Click on the LinkRunner AT Manager button to download the software. 4. Run the downloaded file and follow the instructions to install the software on your computer. 5. Connect your LinkRunner AT 2000 tester to your computer using a USB cable. 6. Launch the LinkRunner AT Manager software and follow the instructions to update the firmware and configure the settings of your tester. You are now ready to use your LinkRunner AT 2000 tester. For more information, you can refer to the user manual or visit https://www.netally.com/products/linkrunner/. Linkrunner At 2000 Software Download *Download* https://t.co/pvoh46gmAZ The LinkRunner AT 2000 has some exclusive features that make it a powerful and versatile network tester. Here are some of them: - *Fiber support:* The LinkRunner AT 2000 can test fiber optic cables using SFP modules (sold separately). You can choose from a variety of SFP modules to test different types of fiber cables at different wavelengths and distances. You can also use the LinkRunner AT 2000 as a fiber optic light source or power meter. - *TruePowerâ PoE Power Test up to 30W:* The LinkRunner AT 2000 can measure the actual power delivered by a PoE device such as a switch or injector. It can also load the PoE device with up to 30W of power to verify its performance and stability. You can also test PoE devices that support the 802.3af/at standards or proprietary PoE schemes. - *IPv6 support:* The LinkRunner AT 2000 can test IPv6 connectivity and configuration as well as IPv4. You can use the AutoTest feature to verify IPv6 address assignment, gateway, and DNS server availability. You can also ping or trace route to IPv6 addresses or hostnames. - *Reflector support:* The LinkRunner AT 2000 can act as a packet reflector for performance tests conducted with other NetAlly products such as OneTouchâ AT Network Assistant or AirCheckâ G2 Wireless Tester. You can use the reflector mode to measure end-to-end network performance metrics such as throughput, latency, jitter, and packet loss. - *More reports: 50 instead of 10:* The LinkRunner AT 2000 can store up to 50 test results in its internal memory, compared to 10 results for the LinkRunner AT 1000. You can also upload your test results to the Link-Live Cloud Service for easy access and management. - *Uses Li-ION rechargeable battery instead of an AA battery pack:* The LinkRunner AT 2000 comes with a rechargeable lithium-ion battery pack that provides longer battery life and faster charging than the AA battery pack used by the LinkRunner AT 1000. You can also swap the battery pack with a spare one (sold separately) for uninterrupted testing. These features make the LinkRunner AT 2000 a valuable tool for network professionals who need to troubleshoot and validate Ethernet networks quickly and efficiently. d8cbe59d7d -- You received this message because you are subscribed to the Google Groups "asciidoc" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/asciidoc/f781f9be-b1e2-4e1a-b45d-d42750f7e149n%40googlegroups.com.
