If you look in Appendix A of this manual, http://www.redbooks.ibm.com/abstracts/sg247848.html?Open
You will find an example of the KMC instruction used in module CPACF010. This should show you how to use both KM and KMC. You should be able to assemble this module and convince yourself it works. Lennie Dymoke-Bradshaw MBCS CITP Accredited Senior I/T Specialist, System z, Security and Cryptography, IBM Software Group Mail: Lennie J Dymoke-Bradshaw/UK/IBM@IBMGB or [email protected] There are two types of people in the world; those who have been hacked, and those who will be hacked. From: Martin Truebner <[email protected]> To: [email protected], Date: 19/11/2013 19:33 Subject: Specification exception on a z10 Sent by: IBM Mainframe Assembler List <[email protected]> Help- I have read POP-8 (ver 9) more than once I get a SOC6 on a z10 against a KM instruction KM 6,4 Function code is 18 Password is addressed by by parmblock R6 is somewhere R4 is the code to encode R5 is X'20' What could be wrong? I am lost and I hope to find someone that understands what I am saying. -- Martin Pi_cap_CPU - all you ever need around MWLC/SCRT/CMT in z/VSE more at http://www.picapcpu.de Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
