Hi again!

As stated in the mail, filescan mode was only used to verify that/or not
clamscan or any other commandline scanner had the same failing result. (as
was the case)
I am using File::Scan::ClamAV but since it does not report any viruses
anymore I had to test different ways to establish if/or not clamAV was a
problem. (seems not to be)

I will compare your install below to mine and see if there is anything that
differs(at a glance, not much!) 
Thanks for fast reply.
I'll be back!

Regards,
Pontus

-----Original Message-----
From: Colin Waring [mailto:[email protected]] 
Sent: den 5 december 2013 13:55
To: 'ASSP development mailing list'
Subject: Re: [Assp-test] Problems with clamav and filescanner.

Any reason you're using filescan for clam?

This is an extract from my server build document for Ubuntu 12.04 LTS - note
that a couple of Perl modules fail to build when using the ASSP mod_inst.pl
so you have to get them installed manually. Below assumes you are starting
with a completely fresh perl install so does some config you may not need.
Also verify with the clamav-unofficial-sigs project that 3.7.2 has not been
replaced by a newer version and remember to check for updates occasionally.

apt-get install rsync clamav clamd clamav-daemon #For some reason I have
clamd and -daemon, I think one is deprecated but you would need to check
that perl -MCPAN -e shell install Bundle::LWP install YAML o conf init
connect_to_internet_ok urllist o conf init urllist o conf urllist push
http://mirror.bytemark.co.uk/CPAN/
o conf urllist push http://mirror.ox.ac.uk/sites/www.cpan.org/
o conf commit
install CPAN
reload cpan
install File::Scan::ClamAV
cd /root
wget
http://downloads.sourceforge.net/project/unofficial-sigs/clamav-unofficial-s
igs-3.7.2.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Funofficial-sigs
%2F&ts=1382875090&use_mirror=heanet
tar -xzvf clamav-unofficial-sigs-3.7.2.tar.gz
cd clamav-unofficial-sigs-3.7.2

You'll then need to put the script in a permenant location, set up the conf,
logrotate and cron files where they should be and you'll get a lot of handy
extra definitions

Back in ASSP, simply check UseAvClamd. Make sure the other clam settings are
ok and consider using the ASSP_AFC plugin.

I've never touched filescan settings and the stats report plenty of viruses
detected.

All the best,
Colin Waring.

-----Original Message-----
From: Pontus Hellgren [mailto:[email protected]]
Sent: 05 December 2013 11:14
To: 'ASSP development mailing list'
Subject: [Assp-test] Problems with clamav and filescanner.

Hi There!

I run ASSP version 2.3.4(13335) on Ubuntu 12,4 LTS and have installed clamd
for antivirus scanning.
For some reason it does not catch anything running it with ASSP.
If I run tests with eicar.com (txt, zip, 2xzip) files via commadline
(clamscan) picks it out, but if I mail them by ASSP there is no catch.
So, I installed AVG commandline scanner and made a script to use it as a
filescanner and ran some testruns, no catch via filescan in ASSP.
(logs say files where OK but they should not have been) Running the AVG
commadline scanner by hand worked every time, but not in ASSP.
So, I rewrote the script to use clamscan as a filescanner, made same tests,
still no catch.

Somehow, I belive, ASSP write the .eml files, in the  virusscan directory,
in a fashion(I don't kon how), so it makes clamd, clamscan/filescanners
unable to catch the eicar.com(txt, zip, 2xzip) and then probably all other
viruses.

Here is the script I used for filescanning in ASSP:
#!/bin/bash
# Filename: avg.sh
# Createor: Pontus Hellgren 20131201
# Use: Script using avgscan for filescanning in ASSP

logfile=/var/log/assp-avg.log # Set a logfile

if [ -z "$1" ] # Check for input filename then echo "OK" # NO filename
input, no need to confuse ASSP echo "No file to scan, sending [OK]" >>
$logfile # Log it to logfile exit # No need to continue fi

scanfilename=$1 # Set filename to scan

if [ -f "$scanfilename" ] # If file exist do scan then result=`avgscan -a
$scanfilename >/dev/null 2>&1; echo $?` # Scan with AVG and save result,
discard other output if [ $result -eq 0  ] # If 0 then no virus found, reply
OK else reply VIRUS then echo "OK"
echo "$scanfilename [OK]" >> $logfile # Log ok to logfile echo >> $logfile
elif [[ $result -eq 4 || $result -eq 5 ]] # If 4 or 5, Virus or potentially
unwanted program detected then echo "VIRUS"
echo "$scanfilename [VIRUS]" >> $logfile # Log virus to logfile echo >>
$logfile else echo "OK" # Return of any other number equals to us an error,
don't confuse ASSP echo "$scanfilename [ERROR]" >> $logfile # Log error to
logfile echo >> $logfile fi fi

In ASSP I set the following:
FileScanDir: /usr/share/assp/virusscan/
FileScanCMD: /usr/share/assp/virusscan/avg.sh FILENAME FileScanBad:VIRUS
FileScanGood:OK
FileScanRespRe:

Any ideeas to what goes wrong?

To use script for clamscan, change "avgscan -a" to "clamscan", change the
ELIF to only 1 for VIRUS.
Clamscan only reports 2 for any error else but OK or VIRUS.

Regards,
Pontus





----------------------------------------------------------------------------
--
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Assp-test mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/assp-test


----------------------------------------------------------------------------
--
Sponsored by Intel(R) XDK 
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Assp-test mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/assp-test



------------------------------------------------------------------------------
Sponsored by Intel(R) XDK 
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Assp-test mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/assp-test

Reply via email to