Hello!

> Which behavior of assp do you expect?
This was absolutely my fault, so it was a surprise situation for a couple 
minutes. The first I did is disabled backscatter on ForeFront, just forget to 
mention this.


> Do not use BATV - used 'Do Message-ID Tagging and Validation (FBMTV) 
> (DoMSGIDsig)'  instead.
Thanks! I've already did it.


Best regards
Alexander Shabalin

From: Thomas Eckardt <thomas.ecka...@thockar.com>
Sent: Wednesday, October 31, 2018 11:29 AM
To: ASSP development mailing list <assp-test@lists.sourceforge.net>
Subject: Re: [Assp-test] Dual BATV sign with LDAP - user not found

>Publishing this info just to know how to deal with it.
>I know, this isn't normal situation but I was a little surprised with behavior.

Which behavior of assp do you expect?

ASSP not expects to get BATV-tagged mails from a local MTA - strictly not, if 
'DoBATV' is enabled (this is nonsense!) - it will possibly work, if 'DoBATV' is 
disabled, but this was never tested.

Solution - if BATV-tagging is wanted:

- switch off all BATV-tagging on local MTA's (Exchange Edge (with ForeFront) - 
in your case)
- configure the ASSP BATV options and enable 'DoBATV' (already done in your 
case)


recommendation:

Do not use BATV - used 'Do Message-ID Tagging and Validation (FBMTV) 
(DoMSGIDsig)'  instead.

Thomas





Von:        "Shabalin, Alexander" <ashaba...@jgl.ru<mailto:ashaba...@jgl.ru>>
An:        
"assp-test@lists.sourceforge.net<mailto:assp-test@lists.sourceforge.net>" 
<assp-test@lists.sourceforge.net<mailto:assp-test@lists.sourceforge.net>>
Datum:        30.10.2018 15:07
Betreff:        [Assp-test] Dual BATV sign with LDAP - user not found
________________________________



Hello!

I've started a new installation of ASSP an found strange behavior.
After I inserted ASSP to mailflow like this
Exchange - Exchange Edge (with ForeFront) - ASSP - Relay - Internet.
I've got two BATV sings (one from ForeFront and one from ASSP).
And LDAP query for local user fails if it wasn't in ldaplistdb.

2018-10-30 13:50:25 m1-96625-11339 [Worker_2] 192.168.10.4 
<jvolk...@mydomain.ru<mailto:jvolk...@mydomain.ru>> info: BATV - changed sender 
from 
prvs=0841626AFF=jvolk...@mydomain.ru<mailto:prvs=0841626AFF=jvolk...@mydomain.ru>
 to 
prvs=5841ea17cc=prvs=0841626AFF=jvolk...@mydomain.ru<mailto:prvs=5841ea17cc=prvs=0841626AFF=jvolk...@mydomain.ru>
2018-10-30 13:50:26 [Worker_2] Info: LDAP - 
prvs=0841626aff=jvolk...@mydomain.ru<mailto:prvs=0841626aff=jvolk...@mydomain.ru>
 not found in LDAP-cache (ldaplistdb)
2018-10-30 13:50:26 [Worker_2] Info: LDAP - 
jvolk...@mydomain.ru<mailto:jvolk...@mydomain.ru> not found in LDAP-cache 
(ldaplistdb)
2018-10-30 13:50:26 [Worker_2] Info: LDAP Results 
(&(|(|(|(|(&(objectclass=user)(objectcategory=person))(objectcategory=group))(objectclass=publicfolder))(!(objectclass=contact)))(objectclass=msExchDynamicDistributionList))(proxyaddresses=smtp:prvs=0841626aff=jvolk...@mydomain.ru)(!(msExchHideFromAddressLists=TRUE))):
 0 :
2018-10-30 13:50:26 [Worker_2] Info: caching result for 
jvolk...@mydomain.ru<mailto:jvolk...@mydomain.ru> in LDAPNotFound
2018-10-30 13:50:26 m1-96625-11339 [Worker_2] [RelayAttempt] 192.168.10.4 
<prvs=0841626AFF=jvolk...@mydomain.ru<mailto:prvs=0841626AFF=jvolk...@mydomain.ru>>
 to: tkadysh...@externaldomain.ru<mailto:tkadysh...@externaldomain.ru> relay 
attempt blocked for: 
prvs=5841ea17cc=prvs=0841626AFF=jvolk...@mydomain.ru<mailto:prvs=5841ea17cc=prvs=0841626AFF=jvolk...@mydomain.ru>
 - because RelayOnlyLocalSender is set to ON
2018-10-30 13:50:26 m1-96625-11339 [Worker_2] 192.168.10.4 
<prvs=0841626AFF=jvolk...@mydomain.ru<mailto:prvs=0841626AFF=jvolk...@mydomain.ru>>
 to: tkadysh...@externaldomain.ru<mailto:tkadysh...@externaldomain.ru> [SMTP 
Error] 530 Relaying not allowed

I know, this isn't normal situation but I was a little surprised with behavior.

Publishing this info just to know how to deal with it.


Best regards
Alexander Shabalin



_______________________________________________
Assp-test mailing list
Assp-test@lists.sourceforge.net<mailto:Assp-test@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/assp-test






DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally 
privileged and protected in law and are intended solely for the use of the
individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no known 
virus in this email!
*******************************************************
_______________________________________________
Assp-test mailing list
Assp-test@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/assp-test

Reply via email to