Hi Wim, thanks for your logs...I have resolved this problem of ehlo (pix firewall) but not this :
if you have a similar setup with TrendMirco's product, please could you look at my problem with CCallspam. I have this error only with spamaccount but sometimes imss don't receive the dot command Do you use CCallspam ? Thanks Jérôme. For a good mail : << MAIL FROM: <[EMAIL PROTECTED]> >> 250 <[EMAIL PROTECTED]>: Sender Ok << RCPT TO: <[EMAIL PROTECTED]> >> 250 <[EMAIL PROTECTED]>: Recipient Ok << DATA >> 354 IMSS: Send data now. Terminate with "." DOT command received ... scan antivirus ... Routing Table for Recipient - <[EMAIL PROTECTED]> : SmartHost<exchange:25>, DNSList<>, UseDNS<0>, Outbound<0> Host list for SmartHost<exchange:25> Forwarding mail for <[EMAIL PROTECTED]> to exchange via port 25 << 220 ****************************************************************************2*************\r\n >> EHLO helo\r\n << 500 command not recognized.\r\n >> HELO helo\r\n << 250 ok\r\n Downstream do not support ehlo, use helo instead. rcpt=<[EMAIL PROTECTED]> interScanSendMailSMTPEx() to set setting bTransfer827 = <FALSE> >> MAIL FROM:<[EMAIL PROTECTED]>\r\n << 250 ok - mail from <[EMAIL PROTECTED]>\r\n >> RCPT TO:<[EMAIL PROTECTED]>\r\n << 250 ok - recipient <[EMAIL PROTECTED]>\r\n >> DATA\r\n << 354 send data. end with crlf.crlf\r\n >> .\r\n << 250 ok\r\n >> QUIT\r\n << 221 closing connection\r\n MDA finish, delivery success, spend <234> ms and for a wrong mail : << MAIL FROM: <[EMAIL PROTECTED]> >> 250 <[EMAIL PROTECTED]>: Sender Ok << RCPT TO: <[EMAIL PROTECTED]> >> 250 <[EMAIL PROTECTED]>: Recipient Ok << DATA >> 354 IMSS: Send data now. Terminate with "." AFTER 20mn WAIT_TIMEOUT in ClientNetworkThread() ERROR: ISNT Data tmp file still open. For a wrong mail "DOT command received" is missing My config : 3 servers : Internet -> ASSP (25) -> IMSS (25) -> Exchange (25) ----- Original Message ----- From: "Wim Borghs" <[EMAIL PROTECTED]> To: "Jérôme PHILIPPE" <[EMAIL PROTECTED]> Sent: Tuesday, January 23, 2007 4:28 PM Subject: Re: [Assp-user] whitelisting for large messages possible? >I have a very similar setup. > > For incoming you should see something like: > 2007/01/23 15:56:40 GMT+01:00 << NOOP Connection from: 66.231.227.32, > 23 Jan 2007 15:56:40 +0100 relayed by ASSP-nospam [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250 mymailserver.tld: Ok [110:119c] > 2007/01/23 15:56:40 GMT+01:00 << EHLO gorolba.terra.com [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250-mymailserver.tld supports the > following ESMTP extensions: [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250-SIZE 52428800 [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250-DSN [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250-8bitmime [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250 OK [110:119c] > 2007/01/23 15:56:40 GMT+01:00 << MAIL FROM:<[EMAIL PROTECTED]> > SIZE=25400 [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250 <[EMAIL PROTECTED]>: Sender Ok > [110:119c] > 2007/01/23 15:56:40 GMT+01:00 << RCPT TO:<[EMAIL PROTECTED]> [110:119c] > 2007/01/23 15:56:40 GMT+01:00 >> 250 <[EMAIL PROTECTED]>: Recipient > Ok [110:119c] > 2007/01/23 15:56:41 GMT+01:00 << DATA [110:119c] > 2007/01/23 15:56:41 GMT+01:00 message-id Received from > gorolba.terra.com ([127.0.0.1]) by mymailserver.tld [110:119c] > 2007/01/23 15:56:41 GMT+01:00 message-id >> 354 mymailserver.tld: Send > data now. Terminate with "." [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id DOT command received [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id >> 250 mymailserver.tld: > Message accepted for delivery [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id Message from: > <[EMAIL PROTECTED]> [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id Message map > <d:\IMSS\mqueue\message-id.DF>, Subject=<RE: Viaje>, > TID=<4508> [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id Message to: > <[EMAIL PROTECTED]> [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id Push email into <scanning > queue> OK [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id << QUIT [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id >> 221 mymailserver.tld > closing connection. Goodbye! [110:119c] > 2007/01/23 15:56:42 GMT+01:00 message-id MTA finish, spend <2250> ms, > size=(0, 25934) bytes, 1 messages [110:119c] > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user
