> Before installing assp, hmailserver sends and receives email just > fine. > > After installing assp, I cannot send but can receive emails.
hm... sounds like there may be some problem with the config; didn't check your config (also since the ML strips off attachments - and in any case, better NOT sending around your config ;-D) but I strongly suspect that you'll need to revise your mailflow setup; my suggestion is the following: 1. Install the "MS Loopback adapter" on your hmailserver box and set it up using a subnet different from any other in use; for example, set it up as 172.20.8.25/255.255.255.0 (no gateway, no DNS) 2. Ensure that hMailServer SMTP is ONLY listening on 172.20.8.25:8025 3. Ensure that ASSP is listening on <public>:25 where <public> is the public IP address for your mailserver 4. Configure the ASSP mail host to be 172.20.8.25:8025 (hMailServer) 5. telnet to your mailserver:25 if all is working ASSP will log the connection AND you'll also see the banner from your hMS 6. Stop ASSP, Install the IIS SMTP, configure it to listen on 172.20.8.25:9025, start ASSP 7. Configure ASSP to use 172.20.8.25:9025 as the relayhost 8. Bind the relayport in ASSP to 172.20.8.25:125 9. Configure hMailServer to use 172.20.8.25:125 as the smarthost for outgoing email delivery using the above configuration, your mail flow will be the following * Inbound Sender => ASSP:25 => hMailServer:8025 * Outbound hMailServer => ASSP:125 => IIS_SMTP:9025 => destination MX HTH ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Assp-user mailing list Assp-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/assp-user
