Yeah except the SPA-xxxx is using in-band... and the x-lite had to use outof-band... ugh :)
On 5/15/05, Paul <[EMAIL PROTECTED]> wrote: > Since that works, you can use the web interface to see what dtmfmode the > spa-xxxx is using and set your softphone to use the same. > > Matt wrote: > > >Interesting... it seems to work fine with SPA-XXXX units.. it just > >seems to be the xten soft phone... wierd... wonder why one dtmf would > >get through and then no others? > > > >On 5/15/05, Paul <[EMAIL PROTECTED]> wrote: > > > > > >>Matt wrote: > >> > >> > >> > >>>Yes... when doing an echo test.. or calling out over any other of the > >>>providers I use... or any of my PRI lines.... I can hear the DTMF > >>>tones just fine... it's only voipjet that I'm having an issue with, > >>>and only after the first DTMF tone is sent.. Clearly I don't think > >>>I'm going to get anywhere here. > >>> > >>>On 5/15/05, Paul <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>> > >>> > >>>>Matt wrote: > >>>> > >>>> > >>>> > >>>> > >>>> > >>>>>The current device I am using is an xten soft-phone. And to answer > >>>>>the questions when I call myself.. I can hear ME (from both sides) but > >>>>>only ever hear the first OUTGOING dtmf tone... > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>What about the * extension 600 echo test? Did you try that? You should > >>>>be able to hear dtmf echoed back except for # which takes you out of the > >>>>test. > >>>> > >>>> > >>>> > >>>> > >>>> > >>The codec and dtmfmode have to be compatible. You can force them for one > >>provider only in sip.conf and iax.conf to test this. > >> > >> > >> > > _______________________________________________ > Asterisk-Biz mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-biz > _______________________________________________ Asterisk-Biz mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-biz
