Jon, Thank you very much for access to your hard work. I will look it over carefully.
:) Paul >Paul, >If you don't load the drivers for the T-1 hardware then you should be >able to simply run a pass-through cable connecting to your second >server's T-1 hardware. This will work on fail-over only if the primary >powers down - which you can do using a UPS that is intelligent. >I use a set of scripts that mirror the primary to a secondary and keep >the secondary up-to-date (within 24 hours of changes to the primary). >http://www.trilug.org/~jonc/Failover_scripts/ >I've been using the same set of scripts for about 5 years. They work >fine for all my Master/Slave setups. >I'm new to the list, but we've been using Asterisk for corporate use for >over three years now. >Jon Carnes >FeatureTel _______________________________________________ Asterisk-Biz mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-biz
