trixter aka Bret McDanel wrote:
On Sun, 2006-06-11 at 18:49 -0700, Mike Fedyk wrote:
in sip.conf have you tried setting externip/externhost and localnet (you
need to define both your local network and your external ie non NAT
address not just one).
Then NAT settings should have meaning.
Yes, I have those properly set to the public static ip and and local
network CIDR.
is this a peer or just something done from a dial command? if peer can
do verify NAT status by doing a sip show peers?
I have not seen this problem in 1.2.9.1 myself (nat works as it should
on my test boxes running that version) so I am curious what is different
with yours.
Name/username Host Dyn Nat ACL Port Status
Asterisk-A:
haf/mfedyk 70.90.x.x N 5060 OK (34 ms)
Asterisk-B:
mikefedyk/s 63.194.x.x D N 5060 OK (34 ms)
Also, note that asterisk-b is behind a NAT to the internet, and
asterisk-a is the NAT for its local network. There is no NAT between
asterisk-a and the internet, and no externip setup on that host either.
Mike
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-biz
