The Toshiba has a single line extension unit which allows one analog phone and one can always interface a key system or PBX to Asterisk via FXO to FXS convertion. If you want to use the IVR in * to select extensions on the Toshiba then you will have a problem as the incoming calls can only use the intercom channel. As with most key systems the concept is to use the intercom channel to announce a call pickup on a line number eg "you have a call on line one" with a PBX the called person only has to hold the line while the call is transfered. Actually, a client of mine recently completely swapped a Toshiba system for an * solution. the more lines and stations the key system has the more likely an * solution will be accepted.
Henry L. Coleman. Web: www.voip-pbx.ca Tel: 1 866 415 5355 Kim C. Callis said: > A client wants to connection their Toshiba Strata 96 to *. I have > installed > a Digium TDM 11B (one fxo and one fxs), and was wondering is I had to do > anything spectacular to make * talk to the Toshiba? I figured that I would > connect the fxs back to the 66-block, and tie the fxo port into the > 66-block > as well. On the Toshiba assign an extension to the fxs card, and if I am > following this correctly, all . > a person as to do is dial to that extension and have all of the > functionality of *. > > Does that sound correct or have I taken a wrong turn somewhere? > > K. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-biz mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-biz > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-biz mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-biz
