Oliver
We have a lot of experience connecting asterisk to a TDM PBX using Sangoma E1 Card. It will work!! Just pay attention to the E1 clocks how is the master and how is the slave. Good luck Alex www.tikalnetworks.com Alexander Argov CEO Tel +972 (73) 2209100 Mobile 972-52-3682486 fax +972 (3) 9236405 P.O.B 13317 Tel Aviv 61132 E-Mail: [EMAIL PROTECTED] <e-mail:[EMAIL PROTECTED]> ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Olivier Sent: Friday, April 06, 2007 10:35 AM To: [email protected] Subject: [asterisk-biz] Q.SIG and voice tunneling Hello, Does it make sense to use Asterisk and Digium hardware for Voice and Q.SIG signals point-to-point transportation ? Today's setup: PBX1 --------- leased line --------- PBX2 Prospective setup: PBX1 --------- Asterisk1 -------- IP network --------- Asterisk2 -------- PBX2 PBX1 and PBX2 are old legacy PBXs which are networked using some kind of Q.SIG, and E1 interfaces. As transportation is point to point, I was wondering if Asterisk and Digium cards could be relevant for that as : - we don't need to understand anything in what PBX are saying to each other, - imperative requirement is to leave unchanged voice and signal channels. Has anyone experienced that ? What would you say about it ? Best regards <http://704486.sigclick.mailinfo.com/sigclick/06000605/0A074D0B/02064E03 /31021211.jpg>
<<attachment: image002.jpg>>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-biz mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-biz
