Vazir,
Not at the moment. It currently combines everything destine to the same
MAC address on to a single frame (which could overflow 1500 bytes.) You
may have multiple MAC address destinations with multiple sub-addresses
in zaptel.conf: ie 4 MAC addresses with 7 spans each equaling 28 T1s.
It could be extended to split up the frame destine to the same MAC
address onto multiple Ethernet frames based on the sub-address, such that:
V = Configured Span Number
Actual Ethernet Frame # = (V >> 3)
Actual Sub-Address = (V mod 7)
This would then allow more than 7 T1 spans to the same MAC address, by
using multiple Ethernet frames.
Thanks,
-Joe
Thralling Penguin LLC
Vazir wrote:
Joseph,
Does your driver splits the load over different frames if
over 7 spans have to be used, but we do not want to use a
single frame in the size over 1500b, in other word, is
there a way of limiting the ethernet frame size?
On 11 May 2007 17:56, Joseph Benden wrote:
Hello,
I have developed an extension protocol for TDMoE to allow
multiple TDM spans to be coalesced in to a single frame
that is sent and received on the physical network layer.
This new process was designed to increase the efficiency
of TDMoE allowing for high-density telephony
applications.
More information is available here:
http://www.thrallingpenguin.com/articles/tdmoe-mf.htm
Thanks,
-Joseph Benden
Thralling Penguin LLC
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-dev
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-biz
