I need hardware recommendations for the following setup: Channel bank with 4FXO + 4FXS feeding into a Single T1 server supporting 4-10 users with 4 incoming analog lines(hence the 4FXO ports). The FXS ports will be utilized for Modems outbound mainly.
IP phones will be utilized for voice comms, I've already decided on Polycom 501 and 330 phones. I'm just looking for the server hardware suggestions. I think I've decided on a Rhino R2T1 card and most likely Rhino Channel Bank, but am open to other suggestions. Would hardware echo cancellation be required in such a setup? I'm looking to stick with either Dell or HP hardware for the server. Thanks. Anyone in the local Dallas/Fort Worth area that would like to bid please reply as well and I will contact you off list. ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please notify Texas Health Management Group immediately at 1-817-310-4999. Texas Health Management Group, its subsidiaries, and affiliates hereby claim all applicable privileges related to this information. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-biz mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-biz
