Hello, the functions of our cards are extreamly same with digium, and they are produced by ourselves with our own brand.
2010/5/11 Brad Bendy <[email protected]> > Are these Digium cards or your brand, ie: not Digium? > > On Tue, 2010-05-11 at 12:00 +0800, Andy Spring wrote: > > Dear Everyone, > > > > Our company now can provide some models of asterisk card, both the > > quality and price are very good, they come with new technology, based > > on digium card. > > Here below is our TE405P details to show to you everyone, we have also > > some other models of > > AX-4T Four T1 PCI Card ; > > TDM410P Asterisk card; > > TDM800P Asterisk card; > > TE110P Asterisk card; > > Asterisk card with 2 FXO + 2 FXS modules > > If anyone is interested in, please kindly do not hesitate to let me > > know, so I can send the details to you for your reference. Thanks. > > > > Details of TE405P: > > The TE405P supports both E1, T1, J1 environments and is selectable on > > a per-card or per-port basis. This feature enables signaling > > translation between E1, T1, and J1 equipment and allows inexpensive T1 > > channel banks to connect with E1 circuits. Because the TE405P improves > > I/O speed by up to 10 times, the result is reduced CPU usage and > > increased card density per server. > > Digium has designed the TE405P to be fully compatible with existing > > software applications and it is fully integrated with the Asterisk > > Open Source PBX/IVR platform. Also, the open source driver supports an > > API interface for custom application development. With the combination > > of Digium Hardware and Asterisk software, numerous combinations of > > telephony configurations are possible. From the traditional PBX to > > VoIP Gateways, Digium solutions are paving the way for a new > > generation of worldwide communications. > > > > The TE405P supports industry standard telephony and data protocols, > > including Primary Rate ISDN (both N. American and Standard Euro) > > protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data > > modes. Both line-side and trunk-side interfaces are supported, also > > included are advanced call features. > > > > The TE405P is for use only with a 5.0 volt PCI slot. The TE410P is for > > use only with a 3.3 volt PCI slot - typically available on newer > > server motherboards and in 64-bit PCI bus architectures > > > > > > Thanks > > > > Best regards > > -- > > andy > > [email protected] > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-biz mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-biz > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-biz mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-biz > -- andy [email protected]
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-biz mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-biz
