|
(sending this again in the hope that this time somebody will
be able to help) I recently tried adding more PRI lines to my PSTN gateway
server running FreeBSD 5.3-RELEASE-p10 with a TE410P digium card. The one PRI
has been on it for a few months and seems to work fine, but it would not take
the other 2 but got some odd errors. Any ideas? These 2 PRI came from another
active production server (a Linux server) that works fine so I know the lines
themselves aren't the problem. Span 2 was showing a red alarm which I could seem to get rid
of. Even with it unplugged and turned off the red alarm stayed (and it now also
on span3 with just the span1 in and enabled). Even when just span2 had the red
alarm, I couldn't get span3 or 4 to work either (same errors). === Asterisk Error Log === Aug 9 01:08:51 WARNING[776]: No D-channels
available! Using Primary on channel anyway 24! Aug 9 01:08:57 WARNING[776]: PRI: !! Unexpected
Channel selection 0 Aug 9 01:09:32 ERROR[799]: Unable to open D-channel 72
(Device busy) Aug 9 01:09:32 ERROR[799]: Unable to start D-channel
on span 3 Aug 9 01:09:32 WARNING[799]: chan_zap.so: load_module
failed, returning -1 Aug 9 01:09:32 WARNING[799]: Loading module
chan_zap.so failed! Aug 9 01:10:02 WARNING[817]: PRI: !! Unexpected
Channel selection 0 Aug 9 01:14:11 ERROR[450]: Unable to open D-channel 48
(Device busy) Aug 9 01:14:11 ERROR[450]: Unable to start D-channel
on span 2 Aug 9 01:14:11 WARNING[450]: chan_zap.so: load_module
failed, returning -1 Aug 9 01:14:11 WARNING[450]: Loading module
chan_zap.so failed! Aug 9 01:17:02 ERROR[536]: Unable to open D-channel 72
(Device busy) Aug 9 01:17:02 ERROR[536]: Unable to start D-channel
on span 3 Aug 9 01:17:02 WARNING[536]: chan_zap.so: load_module
failed, returning -1 Aug 9 01:17:02 WARNING[536]: Loading module
chan_zap.so failed! Aug 9 01:19:35 ERROR[448]: Unable to open D-channel 72
(Device busy) Aug 9 01:19:35 ERROR[448]: Unable to start D-channel
on span 3 Aug 9 01:19:35 WARNING[448]: chan_zap.so: load_module
failed, returning -1 Aug 9 01:19:35 WARNING[448]: Loading module
chan_zap.so failed! Aug 9 01:21:58 WARNING[528]: PRI: !! Unexpected
Channel selection 0 === /usr/local/etc/zaptel.conf === # Several variations in here were tried as I tried different
combinations # (like span 1 and 3) but here is what it looked like with
spans 1-3 enabled. # This is a ZAP interface file span=1,0,0,esf,b8zs span=2,0,0,esf,b8zs span=3,0,0,esf,b8zs bchan=1-23,25-47,49-71 dchan=24,48,72 loadzone=us defaultzone=us === /usr/local/etc/asterisk/zapata.conf === ; All that changed here was more of the channel lines [channels] busydetect=1 busycount=7 relaxdtmf=yes ;callreturn=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes ;echotraining=yes ;800 rxgain=0.0 txgain=0.0 immediate=no callerid=asreceived context=pstn-in signalling=pri_cpe group=1 channel => 1-23 channel => 25-47 channel => 49-71 === Software Versions === zaptel-0.10 libpri-1.0.9 asterisk-1.0.9_1 === Part of /var/log/messages === Aug 9 01:19:34 gateway2 kernel: Zapata Telephony
Interface Registered on major 196 Aug 9 01:19:34 gateway2 kernel: wct4xxp0: <Wildcard
TE405/410P Xilinx> mem 0xfebfec00-0xfebfec7f irq 20 at device 5.0 on pci0 Aug 9 01:19:34 gateway2 kernel: wct4xxp0:
[GIANT-LOCKED] Aug 9 01:19:34 gateway2 kernel: TE410P version
c01a009b Aug 9 01:19:34 gateway2 kernel: FALC version:
00000005, Board ID: 00 Aug 9 01:19:34 gateway2 kernel: TE410P: Launching
card: 0 Aug 9 01:19:34 gateway2 kernel: TE410P: Setting up
global serial parameters for unit 0 Aug 9 01:19:34 gateway2 kernel: Registered tone zone 0
( Aug 9 01:19:34 gateway2 kernel: TE410P: Span 1
configured for ESF/B8ZS Aug 9 01:19:34 gateway2 kernel: TE410P: Span 2
configured for ESF/B8ZS Aug 9 01:19:34 gateway2 kernel: TE410P: Span 3
configured for ESF/B8ZS Aug 9 01:19:34 gateway2 kernel: wct4xxp: Setting
yellow alarm on span 1 Aug 9 01:19:34 gateway2 kernel: wct4xxp: Setting
yellow alarm on span 2 Aug 9 01:19:34 gateway2 kernel: wct4xxp: Setting
yellow alarm on span 3 Aug 9 01:19:39 gateway2 kernel: wct4xxp: Clearing
yellow alarm on span 1 Aug 9 01:19:39 gateway2 kernel: wct4xxp: Clearing
yellow alarm on span 3 |
_______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
