Hi, We've got some problems with the Zaptel FreeBSD driver. Our setup is:
HP ProLiant DL360, 1GB Ram, 2 x 3GHz Xeon (G4). Digium TE410P, Rev C, PRI. We've tried the SVN driver (trunk and branch 4.x). None of them seemed to work, mostly we got kernel dump and reboot. Currently we have disabled the 'device APIC', but still got 'Options SMP' and 'Options HZ=1000'. When the driver is loaded, the red flashing light stops on the card. Running a ztcfg -vv gives us a reboot [1]. [1] zaptel.conf: span=1,0,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 # Span 1 bchan=1-15 dchan=16 bchan=17-31 # Span 2 bchan=32-46 dchan=47 bchan=48-62 # Span 3 bchan=63-77 dchan=78 bchan=79-93 # Span 4 bchan=94-108 dchan=109 bchan=110-124 alaw=1-124 loadzone = no defaultzone=no If any other information is needed, please let me know. Best regards, Daniel Nielsen _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
