Simply working with the ports for asterisk and zaptel (make install clean) should do the trick. Fist make sure that your ports are updated using cvsup before the doing the builds.
After that you can just follow the generic intstructions using the standard installation documentation which you can find at: http://www.digium.com/index.php?menu=product_detail&category=hardware&produc t=DEVKIT&tab=documentation Be sure to change all the /etc/ to /usr/local/etc/, for example: /etc/zaptel.conf should be /usr/local/etc/zaptel.conf At least it worked for me on FreeBSD 5.4 -- not so sure about FreeBSD 6.0 though. Good luck. -- Kiffin Rex Gish Gouda, The Netherlands > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jim Freeze > Sent: Wednesday, January 11, 2006 15:20 > To: [email protected] > Subject: [Asterisk-bsd] Looking for Asterisk FreeBSD FAQ > > > Hi > > Can someone tell a newby if there is a FAQ for FreeBSD > specific installs of Asterisk? > > Thanks > > -- > Jim Freeze > _______________________________________________ > Asterisk-BSD mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-bsd > _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
