Aaron Seelye wrote:
Hello,
I have a TDM400P with 4 FXO ports, currently using one. When sending or
receiving calls on this card, there is a nearly constant
popping/clicking sound, which some digging said it was related to the
echo cancellation. I adjusted my gains properly, but to no avail. I
even found that setting echotraining=no in zapata.conf didn't change the
scenario at all. I've plugged analog handsets into the same jack, and
the line is crystal-clear. Below is my zapata.conf, if you guys have any
ideas how I might resolve this, I'd appreciate it. I'm running the
latest zaptel and asterisk btw.
First of delete lines
CFLAGS+=-DUSE_SWI
CFLAGS+= -DPOLLING -DDEVICE_POLLING
from wcfxs/Makefile. Using software interrupts was a bad idea.
If clicks remain try to change PCI slot to another one. And send
your vmstat -i output, please.
--
Sincerely,
Oleksandr Tymoshenko
PBXpress Communications, Inc.
http://www.pbxpress.com
Tel./Fax.: +1 866 SIP PBX1 Ext. 656
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
