On Monday 28 May 2007 17:50, Christian Lox wrote: > Hi all. > > Trying to install asterisk on FreeBSD 6.1-RELEASE. > asterisk is 1.4.3 and zaptel is 1.4.1, which seem to be the latest > releases. > > We want to use a Sitecom HFC based card. > After installing Hans Selaksys i4b the card ist recognized: > ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem > 0xff900000-0xff9000ff irq 19 at device 3.0 on pci2 > ihfc0: Attaching I4B controller 0. > ihfc0: Creating /dev/ihfc0.X. > > Zaptel seems to run: > Zapata Telephony Interface Registered on major 196 > Echo Canceller: MG2 > > But when running ztcfg -vvv we get: > Keyword: [loadzone], Value: [nl] > Keyword: [defaultzone], Value: [nl] > Keyword: [span], Value: [1,1,3,ccs,ami] > Keyword: [bchan], Value: [1-2] > Keyword: [dchan], Value: [3] > > Zaptel Version: 1.4.0-BSD > Echo Canceller: MG2 > Configuration > ====================== > > SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) > > Channel map: > > Channel 01: Clear channel (Default) (Slaves: 01) > Channel 02: Clear channel (Default) (Slaves: 02) > Channel 03: D-channel (Default) (Slaves: 03) > > 3 channels configured. > > ZT_SPANCONFIG failed on span 1: Device not configured (6) > > > > We did not find really helpful on google concerning htis "device not > configured". > > Are we missing something really obvious here? > Thanks for any hint! >
Hello! Did you install and configure "chan_capi" which is also part of the SVN trunk? --HPS _______________________________________________ Asterisk-BSD mailing list Asterisk-BSD@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-bsd
