"Bob" wrote: > Why are the /dev files renamed in zaptel BSD? > > This fix would be to get rid of the "/" in the sprintf that forms the > directory name, but should the "/" be put back in when the files are > created in the first place? > > The file is actually called /dev/zap1, /dev/zap2 ... > > On Linux it is /dev/zap/1, /dev/zap/2 ...
Atcually, I think it's a little more complicated than that. My /dev/zap/ directory has the following contents: [brane] ~ $ ls -l /dev/zap/ total 0 crw------- 1 root wheel 0, 117 Dec 14 15:56 channel2 crw------- 1 root wheel 0, 118 Dec 14 15:56 channel3 crw------- 1 root wheel 0, 119 Dec 19 18:34 channel4 crw-rw-r-- 1 root wheel 0, 109 Dec 14 15:56 ctl crw------- 1 root wheel 0, 116 Dec 14 15:56 timer1 But the channelN devices only show up when Asterisk has connected to the zaptel driver. When Asterisk is stopped, only the ctl and timer devices are present. I think that FreeBSD uses the ioctl() interface to address the zap devices. There was a thread recently in asterisk-dev: Subject: Re: [asterisk-dev] Zaptel patch advice needed Where someone wanted more than 255 channels and the major/minor numbering apparently doesn't allow that, which is probably why the zaptel-bsd driver didn't even bother with /dev/zap/N. I'm going to try and see if opening the devices the way the thread mentioned above does. Others are welcome to try as well. I may have limited success. Ian -- Ian Freislich > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Calvin > Hendryx-Parker > Sent: Wednesday, December 19, 2007 8:06 PM > To: Asterisk on BSD discussion > Subject: [Asterisk-bsd] fxotune and bsd > > Hi, > > We just setup a new FreeBSD server running asterisk 1.4.13 with a > TDM04B card using the zaptel 1.4.6 driver. Everything compiled and > worked from ports including the drivers for the card. The only issue > is that the users are complaining about echo when they call out on the > FXO ports. Seems like fxotune is the magic tool to solve this, but it > just gives me these errors when it runs: > > /dev/zap/1 absent: No such file or directory > /dev/zap/2 absent: No such file or directory > ... > /dev/zap/252 absent: No such file or directory > fxotune: successfully set echo coeffecients on FXO modules > > and it writes out an empty fxotune.conf. > > Anyone else get this to work? > > Thanks, > Calvin > > -- > S i x F e e t U p , I n c . | "Nowhere to go but open source" > Silicon Valley: +1 (650) 401-8579 x602 > Midwest: +1 (317) 861-5948 x602 > Toll-Free: 1-866-SIX-FEET > mailto:[EMAIL PROTECTED] > http://www.sixfeetup.com | Zope/Plone Custom Development _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- Asterisk-BSD mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-bsd
