Hi all! I have a test server with FreeBSD 7.0 and Debian GNU/Linux 4.0 (etch).
My problem is that this card works well in etch and doesn't work in FreeBSD. I have 3 gateways with FreeBSD and I already have asterisk installed with sip phones working. Now I need to integrate the actual PBX structure to my asterisk box. I already tryed to compile the subversion code (obtained via svn co --username svn --password svn https://svn.pbxpress.com:1443/repos/zaptel-bsd) and the /usr/ports/misc/zaptel code. With these two codes my digium interface doesn't work. Unfortunately, now I have a big problem. I already have installed an asterisk server in two BSD's servers and now this servers talk one with other using the Openfire plugin for asterisk, Spark sipphone plugin and asterisk with IAX. Now, I need to integrate the existent PBX structure with my asterisk. To do these, I buy a TDM410P card (that works well in linux), but doesn't work with FreeBSD. As you see above, when the module load, the digium pci isn't recognized. I try to download the trunk version driver, but the same message appears in dmesg. When I take other card TDM400P (loan from friend), all works very fine! Now, I send my answers: 1) The TDM410p is supported by current freebsd zaptel driver? 2) If TDM410p isn't supported, you have plans to port the linux driver soon or not? 3) If you doesn't have time to port this driver, or doesn't plan to make this port at this time (you need to pay your accounts, and I believe that you have so much work to dedicate your time to peoples that me :), my unique solution is change my BSD's gateways to linux gateways, or change this devices to supported devices. How are these supported devices? Sorry my very poor english (I'm a young boy, and I start my english course now). Thanks for your time, help and your patience. Sorry by your spended time with my ignorance... Now, I send any important information to your appreciation/considerations: * Operating system information FreeBSD asterisk.irmaosbocchi.net 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 * Current driver package Current ports version - zaptel-fbsd-1.4.6 * pciconf -l -cv [EMAIL PROTECTED]:0:15:0: class=0x020000 card=0x8005d161 chip=0x8005d161 rev=0x11 hdr=0x00 vendor = 'Digium, Inc' class = network subclass = ethernet cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 * lspci -v (installed from ports) 00:0f.0 Ethernet controller: Digium, Inc. Unknown device 8005 (rev 11) Subsystem: Digium, Inc. Unknown device 8005 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at 8000 Memory at e5000000 (32-bit, non-prefetchable) Capabilities: [c0] Power Management version 2 * dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2394.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR> real memory = 234864640 (223 MB) avail memory = 215818240 (205 MB) ACPI APIC Table: <ASUS P4SPMXSE> ioapic0 <Version 8.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) acpi0: <ASUS P4SPMXSE> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20 acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, df00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 651 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd800-0xd87f mem 0xf0000000-0xf7ffffff,0xe7800000-0xe781ffff irq 16 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 962 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa400-0xa40f irq 16 at device 2.5 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 20 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 21 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe6000000-0xe6000fff irq 23 at device 3.3 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem 0xe5800000-0xe5800fff irq 19 at device 4.0 on pci0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:11:d8:96:3c:43 sis0: [ITHREAD] ed0: <RealTek 8029> port 0x8400-0x841f irq 17 at device 14.0 on pci0 ed0: [ITHREAD] ed0: using obsoleted if_watchdog interface ed0: Ethernet address: 00:c0:df:f4:58:fc pci0: <network, ethernet> at device 15.0 (no driver attached) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 fdc0: No FDOUT register! ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2394013806 Hz quality 800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata0-master UDMA133 ad2: 19092MB <Seagate ST320410A 3.34> at ata1-master UDMA100 Trying to mount root from ufs:/dev/ad2s1a WARNING: / was not properly dismounted sis0: link state changed to UP Zapata Telephony Interface Registered on major 196 Echo Canceller: MG2 -- +------------------------------------------ | Att | Lucas Willian Bocchi | Departamento de Tecnologia da Informação | Setor de Redes, Suporte e Desenvolvimento | Irmãos Bocchi & CIA Ltda +------------------------------------------- ------------------------------------------------ Os e-mails enviados por este domínio são verificados por sistemas antivírus e antispam, visando a proteção dos usuários e dos equipamentos de nossa empresa, bem como para proteger o conteúdo e o trabalho de outros que por ventura venham receber e-mails deste domínio. O Grupo Bocchi se reserva no direito de, a qualquer momento, bloquear ou inutilizar conteúdo de e-mails que venham a ser prejudiciais para o ambiente de trabalho. Caso este e-mail não possua conteúdo que seja relevante à sua atividade profissional, ou a do usuário que a enviou, por favor, delete-o imediatamente. O Grupo Bocchi não se responsabiliza por qualquer dano ou prejuízo que a utilização indevida deste e-mail possa causar a você ou sua empresa. Em caso de dúvidas, favor entrar em contato. --------------------------------------------- Grupo Irmãos Bocchi & Cia Ltda http://www.ibocchi.com.br _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- Asterisk-BSD mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-bsd
