Hi all,
I have begun the release of my MFC/R2 protocol software. At http://www.opencall.org/installing-mfcr2.html there are instructions for installing what I have released so far. This is the MFC/R2 protocol software, and a test program. The software to interface Asterisk to the MFC/R2 code will be released shortly. It used to work, but it hasn't been touched for a while, and Asterisk has changed somewhat. I need to realign my code with the way the current Asterisk CVS works.
In the meantime, if you have a working R2 line and Digium E1 card you can try the software with the test program. It is actually much easier debugging any compatibility issues between the software and the remote switch without Asterisk involved. So, if you want to be an early adopter, here is your chance. :-)
Regards, Steve
_______________________________________________ Asterisk-Dev mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
