|
Hi,
I have two users using EyeBeam with all codecs
enabled.
sip.conf has canreinvite = yes on the general
section.
In all cases peer1 starts the call to
peer2.
If I put disallow=all; allow=speex on both peers,
the connection is established, EyeBeam displays that the channel is using Speex,
but just a second later it blinks and changes into gsm, while the other EyeBeam
does the same, but changes to g711.
If I run a "sip show channels" at this moment,
situation, it show the following:
ippeer1 peer1
30b0889c00b 00103/00000
speex
ipasterisk peer2 900aa26e6e6 00102/00001 ilbc Isn't it totally inconsistent? Each EyeBeam
displaying a codec, sip channels displaying other codecs???
If I put disallow=all; allow=ilbc on both peers,
the connection is established, EyeBeam displays that the channel is using iLBC,
but one user can hear the other well, while the other can't here anything (just
noise). Asterisk log displays "rtp.c:509 ast_rtp_read: Unknown RTP codec 98
received".
Now, sip show channels shows the
following:
ippeer1 peer1
6a2f3a76257 00103/00000
ilbc
ipasterisk peer2 cf4e7917d56 00102/00001 ilbc Now it seems consistent, but peer1 cannot hear
peer2.
Thank you for your help!
Dov
|
_______________________________________________ Asterisk-Dev mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
