|
Hi everyone, We are using Asterisk 1.2 and have a TDM 400P installed with
2 FXO ports – each of these is plugged into a separate PSTN line with its
own phone number. We have everything configured pretty well, but one strange
issue is occurring which I’m hoping you can shed some light on. We use
call forwarding from the PSTN provider (Verizon) when we are going to be away.
In order to turn on call forwarding, we grab an outside line and dial *72 and
then the # we want to forward to. To disable call forwarding we dial *73. After
we have forwarded our calls through Verizon, when a call rings at the forwarded
line, we get a single ring in Asterisk before the call is forwarded. This
behavior is expected as it happened with the old phone system. However,
Asterisk doesn’t seem to drop that channel after that call rings in and
it will remain in the “Off Hook” state until pulling out the phone
line and plugging it back in to Asterisk. Is there a reason for this? Sincerely, Patrick
Greene Not yet an Evo Technologies
client? |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-dev mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
