chaps,
first up, thanx for the release of asterisk 1.2.15. i'm in the midst of
porting it to *BSD, when this came up:
(we've got a PRI configured on span 1, zaptel.conf and zapata.conf attached)
Feb 10 15:19:58 ERROR[270]: chan_zap.c:7041 mkintf: Unable to get
parameters, SUB_REAL=0, ZT_GET_PARAMS=1082411525,zfd=16,res=-1,errno=-25
Feb 10 15:19:58 ERROR[270]: chan_zap.c:10462 setup_zap: Unable to register
channel '1-15'
Feb 10 15:19:58 WARNING[270]: loader.c:414 __load_resource: chan_zap.so:
load_module failed, returning -1
Feb 10 15:19:58 WARNING[270]: loader.c:554 load_modules: Loading module
chan_zap.so failed!
this is of course with the latest subversion repo of the zaptel-bsd
drivers. asterisk 1.2.14 works fine with the zaptel-bsd drivers, but
asterisk 1.2.15 borks with the above.
i tried loading the 1.2.15 chan_zap.so with asterisk 1.2.14 and the 1.2.14
chan_zap.so with asterisk 1.2.15 and in both cases, the same borking happens.
a diff of chan_zap.c between 1.2.14 and 1.2.15 shows some changes but
nothing it seems which would cause the above failure on the ioctl call at,
res = ioctl(tmp->subs[SUB_REAL].zfd, ZT_GET_PARAMS, &p);
if (res < 0) {
ast_log(LOG_ERROR, "Unable to get parameters\n");
destroy_zt_pvt(&tmp);
return NULL;
}
other information, i'm not loading codec_zap.so. is there a dependency
between chan_zap.so on codec_zap.so ?
also, is zaptel-1.2.13 required to run asterisk 1.2.15 ? if so, then we'll
need to port that over before asterisk 1.2.15 becomes usable on *BSD.
note that the present zaptel-bsd drivers work well with asterisk 1.2.14, so
i'm just looking at what changed between asterisk 1.2.14 and 1.2.15 or in
zaptel 1.2.13.
i'm writing to the -dev list because i'm not sure if this is a bug in
chan_zap or its an issue only on BSD due to drivers or something else.
--
Regards, /\_/\ "All dogs go to heaven."
[EMAIL PROTECTED] (0 0) http://www.openmalaysiablog.com/
+==========================----oOO--(_)--OOo----==========================+
| for a in past present future; do |
| for b in clients employers associates relatives neighbours pets; do |
| echo "The opinions here in no way reflect the opinions of my $a $b." |
| done; done |
+=========================================================================+
loadzone=my
defaultzone=my
span=1,1,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
bchan=32-46
dchan=47
bchan=48-62
[channels]
signalling=pri_cpe
context=from_tm
group=1
callgroup=1
pickupgroup=1
priindication=outofband
switchtype=euroisdn
context=from_tm
accountcode=E1_INCOMING
amaflags=default
busycount=4
callwaiting=no
transfer=yes
useincomingcalleridonzaptransfer=yes
threewaycalling=yes
callreturn=yes
relaxdtmf=no
busydetect=no
usecallerid=yes
hidecallerid=no
usecallingpres=yes
echocancel=no
echocancelwhenbridged=no
echotraining=no
immediate=no
overlapdial=yes
pridialplan=unknown
prilocaldialplan=unknown
channel => 1-15
channel => 17-31
signalling=pri_net
context=phones
group=2
callgroup=2
pickupgroup=2
priindication=outofband
switchtype=euroisdn
context=phones
accountcode=E1_NET
amaflags=default
busycount=4
callwaiting=no
transfer=yes
useincomingcalleridonzaptransfer=yes
threewaycalling=yes
callreturn=yes
relaxdtmf=no
busydetect=no
usecallerid=yes
hidecallerid=no
usecallingpres=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
immediate=no
overlapdial=yes
pridialplan=unknown
prilocaldialplan=unknown
channel => 32-46
channel => 48-62
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-dev
