No nise in the line during calls, but there are random spikes of noize when phone is on-hook. It does not happen right after you hang up the call... When there is incoming call the level of Rx is constant and in case of noise Rx rises relatively slowly almost to the level of ringing and then goes out, but TDM400p card registers it as an incoming ring and does not check if it rings further. I think asterisk should hang up the call when it registers dialtone in the line instead of ringing...
Ofcourse that is only my idea, I'm not so good at programming as to rewrite the driver module And sorry for my english :) Marius Stankevičius UAB "Viginta" IT technikas -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro Sent: Tuesday, March 27, 2007 3:49 PM To: Asterisk Developers Mailing List Subject: RE: [asterisk-dev] Problem with phantom rings.... Even though this was not really a dev question, a golden nugget was revealed so I added it to the Wiki http://www.voip-info.org/wiki/view/Asterisk+cmd+WaitForRing . I had his issue once a long time ago and never found a solution except to have the telco tech fix it. Question, is there noise on the line during calls? Is this a complete workaround for the issue or do you still need to have the line looked at? Thanks, Steve Totaro http://www.asteriskhelpdesk.com KB3OPB _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-dev mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
