This one is an developement question..... we are trying to establish a connection using MANAGER API..
On Mon, 02 Apr 2007 Steve Totaro wrote : >This is a user's list question. > >Thanks, >Steve Totaro > > > > _____ > > From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of pandi >ponnangan >Sent: Monday, April 02, 2007 5:28 AM >To: [email protected] >Subject: [asterisk-dev] make a call with IP address > > > > >Hello all, > >We are setting up a gateway in which the SIP devices will be connected >dynamically using the Asterisk system. > >We use the originate Manager API command from our code to call an IP as >(SIP/[EMAIL PROTECTED]). The call rings on the phone and goes through the >normal (default) context and finally hangs up(WARNING[13833]: pbx.c:2415 >__ast_pbx_run: Timeout, but no rule 't' in context 'GTW' >). Want we want to do it originate a simular call to another device say >SIP/[EMAIL PROTECTED] and bridge the two connections. > >Can we expect some hints to move further to establish the call between >SIP/1 and SIP/2. We are not interested in creating static entries in the >.conf files, but open to use Manager API to build the system on-the-fly. > >All we want from the experts is that to validate our logic whether it is >feasible to build up the communication system using the above technique >and suggest us the best way to go about. > > >regards, >Pandi.P > > >
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-dev mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
