Get the latest version of the gui from reading this: http://asteriskNOW.org/install-related
Then make and make install that. You will now have zapscan, run through the setup wizard once again, and it should detect the card. (assuming its a zaptel card and linked in with zaptel (/dev/zap/ctl)) -bk Gustavo Fukao wrote: > I'm trying to use the GUI to add and set analog line but I got error... > > Lines: No analog line hardware installed on the system > > > but > ------------------------------------------------------------------------------------------- > bsd# ztcfg -vv > Keyword: [fxsks], Value: [1] > Keyword: [loadzone], Value: [us] > Keyword: [defaultzone], Value: [us] > > Zaptel Version: 1.4.0-BSD > Echo Canceller: MG2 > Configuration > ====================== > > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > 1 channels configured. > > ------------------------------------------------------------------------------------------- > > > > and on asterisk > > ------------------------------------------------------------------------------------------- > bsd*CLI> zap show status > Description Alarms IRQ bpviol > CRC4 > Wildcard X100P Board 1 RED 0 0 > 0 > > > ------------------------------------------------------------------------------------------- > bsd*CLI> zap show channels > Chan Extension Context Language MOH Interpret > pseudo receive en default > 1 receive en default > > ------------------------------------------------------------------------------------------- > > > What can I do to fix ??? > > > > > Thanks > > > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
