Pretty sure Brandon meant to go into the GUI under Incoming Calling Rules, and then create a new rule that is NOT _NXXNXX0555 or _NXX0555. Create just a 0555 (as if the console says it cant find extensions 0555, the provider is not sending you 575-0555 or 415-575-0555. So instead of matching a 10 digit or 7 digit DID number, you need to match a 4 digit DID number. When you create an inbound rule the pattern section tells you how to create a catchall (ie. _. or something similar, however _. can cause issues matching ALL calls). So change your incoming rules to match the providers dial pattern. If you have your original provisioning document for the PRI it should show provisioning information esf and b8zs as well as the DID pattern they will send you for inbound calls.
Trevor Benson A1 Networks (707)570-2021 x201 [email protected] On Jan 19, 2009, at 2:10 PM, Brent Vrieze wrote: > OK, bkruse not a knock on you as you have helped me many times > (thanks) > but lets define "catch all". > > The 2 I have set up on the Asterisk GUI are "s" and "_X.". > > The dreaded "s" got me for a while because I was not listening to what > the CLI was telling me. Set verbosity up a bit I do that calling the > CLI with -rvvvvvvvvvvvvvv and make a call and watch. Where is it > trying to send the call? > > > > > > bkruse wrote: >> The PRI is probably only sending the last 4 digits (which I have seen >> many providers do), and so you must match 0555 instead of the full >> DID. >> Just set the GUI to "catch all" >> >> -Brandon >> >> Rajesh Kumar ( Alshaya Group International ) wrote: >> >>> Dear Sir, >>> >>> We have configured AsteriskNow with Digium’s TE212P card and would >>> like to know if is it possible to make all the >>> settings/configuration/create dialplan etc using GUI? I tried but >>> was >>> unable to do it using latest GUI Asterisk GUI-version : >>> SVN-branch-2.0-r4389 but was really unable to make and receive >>> calls, >>> however using callfile on Asterisk Server we are able to call but >>> when >>> I try to call to one of our DID it shows the “Extension 0555 not >>> found >>> rejecting calls from 9722929. Please help. If you can show using a >>> screen shot that would a great help to newbie asterisk user. >>> >>> Thank you. >>> >>> * * >>> >>> * * >>> >>> *Regards,* >>> >>> *Rajesh Kumar* >>> >>> *[email protected] <mailto:[email protected]>* >>> >>> *Alshaya Group International* >>> >>> *Tel: +965 298-0555 Ext.- 307* >>> >>> *Mobile: +965 722-4083* >>> >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>> >>> asterisk-gui mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-gui >>> >> >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-gui mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-gui >> >> >> >> > > -- > Brent T. Vrieze > CIM Automation > Softare Engineer > 507-216-0465 > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-gui mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-gui > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
